Examples of 'initial current' in a sentence
Meaning of "initial current"
initial current - This phrase typically relates to the original or starting flow of something, such as electricity or information
How to use "initial current" in a sentence
Basic
Advanced
initial current
An oxidized mediator will minimize the initial current.
Initial current level for starting the arc with coated electrode.
This requires an initial current.
Initial current Allows regulation of the weld starting current.
Numerical simulations illustrated how an initial current perturbation causes these instabilities.
These oscillations will be repeated at each half cycle of the initial current.
The density of the initial current depends on the cerous sulfate concentration.
Allows setting of the time for which the initial current is maintained.
The initial current formed by this process is, thus, primarily due to electrons.
The particular number is determined by an initial current value and a target limit value.
Since this initial current is required for a very short time, it is called field flashing.
Allows you to set a gradual passage between the initial current and the welding current.
In turn, this higher initial current has the opposite effect of reducing the rise time.
Consequently, the initial VR is zero and thus the initial current is also zero.
The initial current is substantially dependent on the applied potential, while the DLC is not.
See also
In a third substep 1c, the measured current Irm is compared to the theoretical initial current Ith.
Initial current accuracy is approximately 3 %.
However, its mission maintains its initial current objectives,.
The initial current was 10 amps, which went down as time progressed.
The initial working voltage is 3 volts and the initial current is 70 mA.
The initial current passing through the glass was about 2.5 amperes.
The current is the increase over initial current at +80 mV.
This initial current is usually 50 % greater than the end current of the preceding burst.
In this impregnation with iodine compound, the initial current density was set to about 0.2 A/dm2.
The initial current spike is the discharge of C811 at switch on.
The electrical current supplied for 12 hours, with the initial current density being 2 A/dm2.
The next burst produces a higher initial current as a result of the condensation during the " off " - time.
You'll also be interested in:
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
Examples of using Initial
Show more
The initial toxicology report came back
Objectives for this initial stage would be
Initial installation after all wiring is completed
