Examples of 'injection cycle' in a sentence
Meaning of "injection cycle"
injection cycle - This phrase is commonly associated with medical contexts and may indicate a series or sequence of injections given over a specified period. It could also refer to the process of administering injections at regular intervals as part of a treatment regimen or medical procedure
How to use "injection cycle" in a sentence
Basic
Advanced
injection cycle
The same is not true of the injection cycle.
An injection cycle starts after the recovery extrusion stage.
Booster injections were given if no initial response on first injection cycle was achieved.
The injection cycle that was just described can then resume.
The mould is then closed ready for the next injection cycle.
Of each injection cycle.
The control loop processor functions as described relative to the injection cycle.
The cooling time and thereby the injection cycle time are reduced.
With the fuel injection cycle thus completed, it can be repeated as desired.
To improve the performance of a refrigerating cycle a gas injection cycle may be used.
Thus, a wide variety of injection cycle profiles can be achieved.
They are usually injected separately, but as part of the same overall injection cycle.
Of course, any other injection cycle can be performed.
The venting ring moves relative to the mirror 5 during each injection cycle.
As a consequence, the injection cycle is prolonged, making it difficult to massproduce the dispenser body.
See also
Consequently, the syringe is returned to its retracted position and the injection cycle is complete.
The duration of one injection cycle was 30 seconds.
The veil enhances the in-plane resin diffusion during the resin injection cycle.
Generally, moving the entire screw forward during the injection cycle would require a large injection cylinder.
Experiments have also been conducted using powdered solid fuels, such as the magnesium injection cycle.
After initiation, the recommended injection cycle of Xeplion is monthly.
Both skins ( inner and outer ) and the suction chambers are obtained in a single injection cycle.
Once this injection cycle has been completed, it may, obviously, be repeated as desired.
In Figure 6, the moveable member is illustrated just at the end of the injection cycle.
A representative fuel injection cycle of the single spring injector 10 is illustrated in Fig . 5.
Injector component positioning during the injection phase of the injection cycle is shown in Figure 2.
The stream valve was switched back 51 min after the start of the injection cycle.
The die filling requires only 5 % of the injection cycle time.
Control valve 26 ' is opened to start the fuel-injection phase of the injection cycle.
As a function of this information, a control system 54 generates an injection cycle and controls a pump.
Thus, the syringe 214 now returns to its retracted position and the injection cycle is complete.
The following Table II describes the required interlocks through one complete injection cycle for apparatus 100.
Long using life over 2.5 million times of injection cycle.
You'll also be interested in:
Examples of using Cycle
Show more
The cycle can be delayed up to nine hours
Press repeatedly to cycle through menu options
Cycle through different information display modes
Examples of using Injection
Show more
Injection is electronically controlled via a common rail
Estimating vaccine and injection material needs
Skin injection hazard risk of explosion or fire
