Examples of 'injection temperature' in a sentence
Meaning of "injection temperature"
This phrase refers to the temperature at which a substance or material is heated or maintained during the process of injection molding
How to use "injection temperature" in a sentence
Basic
Advanced
injection temperature
Injection temperature is an important factor affecting injection pressure.
It mainly concerned injection temperature problems.
This injection temperature must be controlled within a certain range.
It is also possible to use lower injection temperature for these invented compositions.
The injection temperature is normally the same as the dew point of the charge.
These seals are constituted by parts made of elastomer material resistant to the injection temperature.
The choice of injection temperature depends upon the melt flow index of the polyethylene resin.
These parameters usually consist of the viscosity and the injection temperature of each fuel.
Increasing the injection temperature allows to increase the injection rate without increasing the stress.
As stated above the material having the highest injection temperature is usually injected first.
Also, the injection temperature is limited by both thermal degradation and decomposition temperatures.
If the melt flow rate decreases, the preform injection temperature increases accordingly.
Ti, injection temperature.
Curve 23 represents the minimum injection temperature.
Injection temperature, aye. Injection temperature.
See also
In an advantageous implementation mode of the invention, the minimum injection temperature is established at 180 ° C.
Injection Temperature Control Unit - manufacturer, factory, supplier from China.
Maneuvering, control . Injection temperature.
The injection temperature of the heated injection head was set at 150°C.
It is preferred that the viscosity at the injection temperature is 400 mPa · s or less.
In many instances, the injection temperature is selected within the range of from 40 to 95°C.
Figure 6C shows the pellet 610 after it has reached the proper injection temperature.
The core was then cooled to the injection temperature of 80°C.
The formulation was injected into the barrels at an injection temperature ranging from 45 to 58°C.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Injection
Show more
Injection is electronically controlled via a common rail
Estimating vaccine and injection material needs
Skin injection hazard risk of explosion or fire
