Examples of 'inlet zone' in a sentence
Meaning of "inlet zone"
inlet zone: In engineering or environmental contexts, an inlet zone refers to an area where fluid or gas enters a system, chamber, or device
How to use "inlet zone" in a sentence
Basic
Advanced
inlet zone
Inadequate filling of the inlet zone.
A wide inlet zone should be used to evenly distribute the flow.
The raw ground expanded graphite may be fed to the fluidized bed chamber inlet zone.
An end wall of the inlet zone is covered by a wear resistant plate.
Desirably, the reaction zone is positioned between an inlet zone and a disengaging zone.
The function of the inlet zone and the drain zone will be explained below.
Desirably, the reactor apparatus includes a reaction zone, an inlet zone and a disengaging zone.
An inlet zone for receiving the water to be treated ;.
Typically, the reaction zone is positioned between the inlet zone and the disengaging zone.
One inlet zone of the water to be treated which is coagulated and flocculated beforehand ;.
Preferably, the outlet comprises a sealing surface to provide sealing contact with the venturi inlet zone.
Such an installation comprises an inlet zone 31 of water to be treated.
The conveying means 5 extend starting from the fuel inlet zone 3.
The inlet zone 5 and the outlet zone 6 are located in the upper part.
The device 1 appropriately comprises an inlet zone 3 for the fuel.
See also
The inlet zone 3 is shown as a horizontal section B-B in Figure 2b.
In this example the average retention time in the inlet zone is about 1.5 seconds.
Cavity 14 is subdivided into an inlet zone and an outlet zone by a vertical partition 16.
Such sleeve 24 therefore defines said fuel inlet zone 3.
The average retention time in the inlet zone is normally between 0.1 and 4 seconds.
The transfer means 9 of the casing material project into the chamber 12 via an inlet zone 12 a.
Under these conditions, the annular inlet zone ( 46 ) is, under normal operating conditions, filled with fluid.
In the operation chamber ( D ), however, the pressure is the same as in the inlet zone.
The selected dispersing agent can be injected into inlet zone 120 under any suitable pressure.
Second branch 102 defined between the second inlet zone ZE 2 and the second outlet zone ZS 2.
You'll also be interested in:
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
Examples of using Zone
Show more
The effective root zone is also reduced
Zone opened while system is in chime mode c
This is a military zone and you are in command
