Examples of 'inner radius' in a sentence
Meaning of "inner radius"
inner radius: In geometry, the inner radius refers to the distance from the center of a circle or cylinder to the inner edge or surface. It is commonly used to describe the size or dimensions of the inner part of a circular object
How to use "inner radius" in a sentence
Basic
Advanced
inner radius
The inner radius is defined in a circumferential direction.
In one embodiment the plates are curved with an inner radius to facilitate installation translaminarly.
The inner radius of the annulus is a significant factor in the determination of image contrast.
This layer of substantially circular circumference presents an inner radius r i and an outer radius r e.
Sets the inner radius of the gear.
Approximately 7 inches of the wheel inner radius was missing.
A curved inner radius discussed in further detail with respect to FIG.
To obtain this one, use a large height, large inner radius and a low amount of points.
It has an inner radius Ri and a thickness Ep.
Figure 2A shows a first possible trailing edge inner radius.
Over time, the inner radius of the toroid decreased.
The sleeve 6 has an axially extended portion 7 with an increased inner radius.
By contrast, CDs play from the inner radius outward, the reverse of phonograph records.
The inner radius of this annular surface is r1 and the outer radius r3.
Then there exists a unique inner radius r and outer radius R such that,.
See also
The inner radius of the jacket was 67 % wider than the outer radius of the centrifuge.
A square version or a version with a 30 mm inner radius and a 20 mm outer radius are also available.
The lower retaining ring 24 may also be modified, with teeth along its inner radius.
Set the inner radius equal to 2.
Setting the outer diameter D = 2R, the value of the inner radius r is determined.
R = a ratio a / b between an inner radius a and an outer radius b of the tubular support 5.
Radiuses R1 and R2 correspond to the outer, respectively to the inner radius of the annular patch.
Inner radius of the balance [ m ].
In the embodiments disclosed, the inner radius r is equal for each corner portion 23.
Especially, the inner radius R of each of the side portions 24 may be approximately 40 mm.
Of the disk 5 is formed by a first inner radius curvature R4 Fig.
Typically, inner radius R2 increases linearly along the longitudinal length of tapered section 1413.
In this embodiment, both the outer and inner radius R1, R2 vary within the tapered section.
The ring 150 inner radius is selected to that SS occurs before S1.
A dome 56 projects upwardly from the inner radius of the skirt shoulder 54.
In some examples, the inner radius is no less than 85 % of the outer radius.
Specify internal radius or [ Undo /? ], Specify the inner radius of the insulation.
Rstent - Pre crimping inner radius of the stent 1 ( inner radius of the extruded tube ).
The cladding generally has an inner radius R1 and an outer radius R4.
The radius in question is called the inner radius and is between 3/2 and 3 times rs.
If so, than the Inner radius should be,.
The hole-containing region has an inner radius R2 which is not more than 20 µm.
The suction tube 20 has an inner radius R at the lower tube section 20a.
You'll also be interested in:
Examples of using Inner
Show more
Your inner strength should be even stronger
Carefully expose inner leaves and choke
The inner corner has a square shape
Examples of using Radius
Show more
Ideal blast radius for maximum casualties
He will want to be clear of the blast radius
And that radius is expanding every minute
