Examples of 'inner reel' in a sentence
Meaning of "inner reel"
This phrase is unclear and could have multiple interpretations. Please provide more context or clarification
How to use "inner reel" in a sentence
Basic
Advanced
inner reel
Clean inner reel and outer spool.
Place the spring in the new inner reel.
Remove the inner reel and spring.
Place the spring inside the inner reel.
Wind the inner reel with new line.
Single line can be used on either type of inner reel.
Continue winding the inner reel counterclockwise.
Wind the line tightly in the direction shown on the inner reel.
Push the inner reel and outer spool together.
Remove any existing line from the inner reel before cleaning.
Insert the inner reel into the outer spool.
Wind the line tightly in the direction shown on the bottom of the inner reel.
Do not lubricate the inner reel or outer spool assembly.
The inner reel must be totally dry before reinstalling it into the outer spool.
Check the indexing teeth on the inner reel and outer spool.
See also
Place the inner reel into the outer spool.
Wind the line in tight even layers in the direction indicated on the inner reel.
Hold the inner reel and outer spool together.
Membrane line can only be used with the inner reel with the slotted holes.
Do not wind the inner reel before installing the second piece of line.
Insert the ends of new trimming line into the inner reel holes A.
Place the new inner reel inside the outer spool.
If necessary, remove burrs or replace the inner reel and outer spool.
Hold the inner reel in place and install the bump knob by turning clockwise.
The spring must be assembled on the inner reel before reassembling the cutting head.
Hold the inner reel in place and install the bump knob by turning counterclockwise.
NOTE, The spring must be assembled on the inner reel before reassembling the cutting head.
The inner reel is bound up Rewind the line.
NOTE, The spring must be assembled on the inner reel before reassembling the cutting attachment.
Inner reel bound up Replace the inner reel.
Pull the line through the inner reel until only about 4 inches is left out.
Inner reel bound up Rewind the inner reel.
NOTE, The spring must be assembled on the inner reel before.
Pull the old inner reel with existing line from the outer spool.
Install a pre-wound inner reel.
Continue winding the inner reel counterclockwise until approximately 6 inches of line is left.
Remove any debris or grass from the knob, spring, inner reel and foam seal.
While holding the inner reel and outer spool together, screw the bump knob on clockwise.
Use Figure 29 to identify the inner reel you have.
Pull the inner reel with existing line from the outer spool Fig . 29.
Push it up through the line loading hole in the inner reel Fig . 21.
Check the indexing teeth on the inner reel and outer spool for wear Fig . 29.
Place the bump knob, spring and foam seal onto the inner reel Fig . 24.
Insert the ends of the prewound inner reel line into the outer spool eyelets Fig . 26.
Push the inner reel and outer spool together Fig . 15.
Remove the spring from the old inner reel Fig . 26.
Wash the inner reel with warm soapy water Fig . 23.
Remove any old line from the inner reel or obstructions from the outer spool . Fig . 21.
Remove the inner reel from the outer spool Fig . 10.
Place the inner reel back into the outer spool Fig . 20.
