Examples of 'input and the output' in a sentence
Meaning of "input and the output"
input and the output: This phrase refers to the data or information that is entered into a system or process, and the corresponding results or responses that are generated
How to use "input and the output" in a sentence
Basic
Advanced
input and the output
The input and the output was by teletype tape at first.
What is the rule for the input and the output.
The input and the output of the tuner are connected to vector network analyzer.
What happens between the input and the output is your process.
The second is a measure based on the size of the input and the output.
The plugs providing the input and the output of electric power and of monitoring signals.
That value added is confiscated at both the input and the output stage.
The input and the output of the amplifier are respectively referenced E and S.
The first modification is the association of the input and the output station.
The input and the output are separated residual torque-free.
The pressure difference between the input and the output of the filter.
The input and the output of the decision module 14 are connected to a calculator module 15.
Two sets of thyristors are connected to each of the input and the output terminals.
Typically both the input and the output are stored in a file-system.
The accounts shall demonstrate the balance between the input and the output.
See also
In other words, the input and the output of the circuit are both single-pole here.
There is some unwanted coupling between the input and the output of a delay line.
Table 3 illustrates the input and the output assignments for four different starter applications,.
These functions make use of different kinds of files at the input and the output.
Resonator coupled between the input and the output of said inverter ;.
Under these conditions, there is no direct capacitive passage between the input and the output.
The resistor is connected between the input and the output of the feedback amplifier.
Usually, a bifilar wire is used, thereby providing close coupling between the input and the output.
This measurement takes into consideration the input and the output involved in the production process.
The transfer function relates the Laplace transform of the input and the output.
A resistor R3 connects the in-phase input and the output of the operational amplifier U1 as a positive feedback.
The EAS - element transmits circumferential forces between the input and the output flange.
First impedance connected between the input and the output of the inverter, and.
A resistor R5 is connected between the aforementioned inverting input and the output of A2.
An integration capacitor C 3 is mounted between the input and the output of the operational amplifier A 2.
The amplifier A3 has a feedback resistor R2 between the inverting input and the output i.
So, the phasedifference between the input and the output voltages is 180degrees.
For the conversion there are two text variables ( strings ), the input and the output.
The capacitor is connected between the first input and the output of the amplifier.
This avoids capacitive coupling between the input and the output on very long cables.
The STATUS MODE indicates the input and the output status.
An nMOS transistor 7 is connected between the first input and the output of amplifier 4.
A second resistor 91 is linked between this negative input and the output of the amplifier.
Finally, a capacitor is parallel-connected to this first input and the output of the amplifier.
A capacitor is planned, connected between the positive input and the output of the amplifier.
An audio controller 15 is a processor that handles the input and the output of audio signals.
Therefore, the only torque seen between the input and the output is bearing drag.
A phase difference of some 4 ° is noted for both the input and the output reflection coefficients.
One or more Sigma-Delta cells placed between the input and the output of the modulator.
For the filters according to the invention, the input and the output play a symmetrical role.
Each phase discriminator compares the signals between the input and the output of a functional operator Z-1.
A capacitor C2 is connected between the inverting input and the output of the operational amplifier A5.
Resistor 6 is connected between the first input and the output of amplifier 3.
A resistance 40 is connected between the inverting input and the output of the amplifier 38.
An integration capacitor 52 links the negative input and the output of the operational amplifier 44.
You'll also be interested in:
Examples of using Input
Show more
Do not use damaged input or welding cables
The input and output pairs are parallel
Select the desired input source correctly
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
