Examples of 'input gain' in a sentence
Meaning of "input gain"
Input gain refers to the amount of amplification applied to an audio signal as it enters a device or system. It represents the adjustment of signal strength to achieve an optimal level for processing or recording
How to use "input gain" in a sentence
Basic
Advanced
input gain
Turn up the input gain to keep me connected.
Drive controls the amount of input gain.
The input gain control is not a volume control.
This knob controls the input gain level on each source.
The input gain control is preset to match the output of most source units.
You will have to turn up the input gain to maintain my connection.
Thus the input gain can be collectively adjusted for both channels.
This level is regulated by correcting the input gain of the feedback loop.
Set the input gain to the desired volume.
Use the TRIM control to adjust the input gain.
Turn all input gain control elements down.
Select the GAIN item and set the input gain.
Adjust the input gain on your audio interface.
Use the CLIP LED to ensure that the input gain is set properly.
Turning the input gain up does not indicate more power.
See also
Avoid the permanent lighting of the Clip LED by reducing the input gain Gain.
This gives you increased input gain for the best performance.
The input gain of the amplified speaker or similar device may be too low.
This allows easier setting of the input gain and tracking of audio by sound engineers.
The input gain on the transmitter or audio source level may be too high.
All mic channels equipped with input Gain and high pass filters.
Adjust the Input gain controls based on the incoming signal levels.
Avoid the permanent lighting of the peak LED by reducing the input gain Gain.
Each channel has an input gain control for proper level setting.
LEVEL CONTROLS The LEVEL rotary potentiometer is used for changing the input gain.
Slowly increase the input gain of the channel pair driving your subwoofer system.
Also, it is possible to check the input gain and clip state.
Reduce the input gain if the blue LIMIT LED lights up continuously.
In stereo mode, both channels operate independently, with their input gain controls.
Reduce the input gain if the red LIMIT LED lights up continuously.
During this period, the automatic gain control processor progressively raises the amplifiers input gain.
Input gain incorrectly set - input overloading or insufficiently amplified.
Use this knob to adjust the input gain to match the incoming signal ‘ s level.
Input gain control potentiometer, allowing to match the output voltage of the headunit 's.
Turn down ( counterclock wise ) all three input gain level potentiometers and turn on your headunit.
Input Gain is not set properly, or damaged speaker cones.
The recording will stop 5 seconds after input gain level falls below the specified threshold.
Now turn the input gain controls of the installed amplifier anti-clockwise to its minimum position.
Adjust the source volume first, then set the IG2T input gain to an appropriate value.
Turn the input gain on your CXQ 1 to a minimum.
Selectable Solid-State or Tube input gain.
The input gain of the computer sound card is then adjusted in an adjustment step E 47.
If the Clip LED lights up, turn down the input gain.
The input gain factor, Gin, may be dependent on the content that is being processed.
Set appropriate Input Gain switch to 0 dB.
Input Gain Adjust the gain of each input, using the rotary knob.
Gain Adjusting Volume, Adjust the transmitter audio input gain.
Input Gain Clip Light, When illuminated this LED shows clipping is occurring in the preamp.
If these levels are exceeded, reduce the channel 's input gain.
Set the input gain ( volume ) on the amplifier to minimum.
You'll also be interested in:
Examples of using Input
Show more
Do not use damaged input or welding cables
The input and output pairs are parallel
Select the desired input source correctly
Examples of using Gain
Show more
Gain fury when swapping weapons in combat
Interest income and gain on sale of securities
Gain consumer confidence in new forestry practices
