Examples of 'insert the bit' in a sentence
Meaning of "insert the bit"
This phrase is a command or instruction to insert a specific object or element referred to as 'the bit'. The meaning of 'the bit' depends on the context and can range from a literal physical object to a metaphorical or technical component
How to use "insert the bit" in a sentence
Basic
Advanced
insert the bit
Insert the bit and turn clockwise.
Counterclockwise and insert the bit shank.
Insert the bit into the chuck.
Open the chuck jaws wide enough to insert the bit.
Insert the bit by pressing it into the clip.
Pull back the tool holder locking sleeve and insert the bit shank.
Insert the bit into the hexagonal hole.
For large bits, insert the bit as far as it will go.
Insert the bit until stop.
To inser t a bit, insert the bit into collet till lock.
Insert the bit into the hexagonal socket of the.
To insert a bit, insert the bit into collet till lock.
Insert the bit adapter in the keyless chuck and.
When using drill bits, insert the bit into the chuck.
Insert the bit into the spindle as far as possible.
Open the chuck jaws, and insert the bit into the chuck.
Insert the bit into the nose of the tool.
To install the bit, pull the sleeve and insert the bit into.
Then insert the bit again.
For small bits, open jaws enough to insert the bit up to the flutes.
Insert the bit shank into the collet as follows.
Open the rapid-action keyless chuck and insert the bit fully.
Insert the bit and turn the lock col.
Holding the tool with the other . u Insert the bit shaft into the chuck.
Insert the bit into the tool holder until it stops.
Pull back the locking sleeve ( p ) and insert the bit shank.
Insert the bit or chisel into the nose of the tool.
While holding the tool firmly, insert the bit into the material at a 45 angle.
Insert the bit into the tool holder as far as it will go.
Open the chuck by turning the sleeve ( 9 ) counterclockwise and insert the bit shank.
Clean and insert the bit shank into the collet.
Rotate the Chuck ( 1 ) collar clockwise and insert the bit into the chuck.
Insert the bit into the hole of the drive shaft.
With the other. u Insert the bit shaft.
Insert the bit into the tool barrel as far as it will go.
Slide the locking sleeve ( 2 ) to the rear, and insert the bit into the chuck opening.
Insert the bit or accessory shank fully into the collet.
The arrow and insert the bit into the sleeve as far as it will go.
Insert the bit into the hole of the driver shaft.
To fi t a bit, insert the bit shaft into the bit holder.
Insert the bit into the hexagonal recess in the anvil.
To install the bit, insert the bit all the way into the collet cone.
Insert the bit into the hexagonal hole in the socket.
To fit a bit, insert the bit shaft into the bit holder 1.
Insert the bit into the hexagonal hole in the anvil.
Insert the bit shank into the tool holder locking.
Insert the bit all the way into the collet cone.
Insert the bit into the tool holder and let go of the locking collar.
Insert the bit adapter in the keyless chuck and then turn the chuck firmly.
Insert the bit into the SDS chuck as normal.
You'll also be interested in:
Examples of using Bit
Show more
A little bit over my head right now
At least the baby puts up a bit of a fight
I was in a bit of a jam and he came through for me
Examples of using Insert
Show more
Insert the batteries in the proper direction
I will not insert that key card
Insert the accessory into the collet
