Examples of 'insertion opening' in a sentence
Meaning of "insertion opening"
insertion opening: a specific point or area where something can be inserted or added into something else
How to use "insertion opening" in a sentence
Basic
Advanced
insertion opening
Also the insertion opening is substantially ellipsoidal.
Protective plate behind the cooling lance insertion opening.
An insertion opening may be aligned with a center of the guide.
To avoid injury do not reach into the capsule insertion opening.
The central insertion opening has an insert region and a press region.
It is the intention that the stems are retained in the insertion opening.
The insertion opening is sealed shut with the insert in the cavity.
Retention of the stick in the receptacle is established by the adapted insertion opening.
Do not reach into the cap sule insertion opening in order to avoid injuries.
The valve housing is stepped with a widest section closest to an insertion opening.
The plug then hermetically seals the insertion opening against the outer environment.
Also a new plug then does not fit properly into the insertion opening.
A fluid insertion opening is formed in the die for injecting fluid into the cavity.
The securing element hinders the plug from inadvertently moving out of the insertion opening.
It can also be seen that each conductor insertion opening is assigned a labelling element 37.
See also
The write / read mechanism is then opened and the magnetic card returned towards the insertion opening.
This insertion opening 4 is made up of a series of lips 5 that are separated by slots 6.
Preferably, this fixed end is opposite the insertion opening.
The handle insertion opening 32 may be implemented in the form of a groove.
The case has a large-sized cassette insertion opening.
An insertion opening ( 21 ) for a tool able to engage the teeth of said toothing in rotation.
Never reach with your fingers into the capsule insertion opening - risk of injury!
The insertion opening 8 serves to receive a respective end 9 of the positioning instrument 10 FIG.
During use the bottle F is placed from above into insertion opening 8 and then released.
The insertion opening 55, into which the second male type terminal 4 is inserted see Fig.
This clearance forms the insertion opening 18.
Food insertion opening 32 leads to support surface 3.
The insertion recess may be synonymously referred to as insertion opening 63.
Paper detector 12 disposed between insertion opening 6 and transportation mechanism 3 detects the presence of check 8.
The food item is blocked laterally with food insertion opening 32.
The same applies to an insertion opening 55 of the second terminal housing 50.
A tape cassette 1 or 8 is loaded and unloaded through the cassette insertion opening 34 b.
The remaining opening serves then as the insertion opening for insertion of the container ( 3 ).
A winding termination end of the wire 5 is locked and held by the wire insertion opening 62.
The insertion opening 55a extends in the left-right direction.
Fig . 5A is a partly enlarged view of the periphery of an insertion opening.
On the right of the chip insertion opening 66, a plurality of control buttons 65 are provided.
Said capsule head is held in the capsule insertion opening ( 4 ) ;.
In this illustration the insertion opening 24 of the coil body 22 can be seen clearly.
The cover 91 has been pivoted upwards, thus clearing an insertion opening 99.
The zipper is adapted to close an insertion opening 23 for the foetus manikin 29.
A continuity inspector 63 is formed at the bottom of the connector insertion opening 61.
This protects the foot insertion opening 17 and also preserves the locking mechanism 34.
For this purpose, the stems 10 are inserted in the insertion opening 4.
The detecting position DP is located between the insertion opening 18 and the platen roller 26.
The insulating cap 26 is adapted to block partially the upper insertion opening 58.
The tape cassette 1 or 8 is inserted through the cassette insertion opening 34 b into the cassette holder 35.
The electrode unit 70 is installed at a lower end part of the insertion opening 20.
A slide bearing 55c is provided at a middle part of the insertion opening 55a.
At a site proximal relative thereto, a notch 62 is provided which forms an insertion opening 63.
You'll also be interested in:
Examples of using Opening
Show more
I am opening up a new checking account in my own name
In case of accidental opening the cycle stops
Opening of the meeting and address by the
Examples of using Insertion
Show more
This insertion thus does not seem necessary
Entry plug locked at insertion ready position
Insertion of a new roll of paper is described at item
