Examples of 'installation depth' in a sentence
Meaning of "installation depth"
This phrase is typically used in the context of construction or technological installations. It refers to the measurement or specification of the depth required to install or fit something properly. It indicates the amount of space needed for an object or system to be installed correctly and function effectively
How to use "installation depth" in a sentence
Basic
Advanced
installation depth
Requires careful consideration of the installation depth.
Reduced installation depth for optimised air distribution.
High performance at low installation depth.
Installation depth below the static water level.
The devices are characterized by a compact design with a minimal installation depth.
The installation depth of the cupboard has to be at least.
Extra flat TFTs for tableaus with low installation depth.
Otherwise no further installation depth is required behind the mounting plate.
CONO alto, optimal audio solution for minimum installation depth.
The lower installation depth also enables joint construction projects.
Absolute encoders with Ethernet / IP and extremely short installation depth.
The sensor then requires no installation depth behind the mounting plate.
The installation depth is always 57mm and is not specified.
This means the sensor requires no installation depth behind the mounting plate.
Use of 90 quick-turn elbow required to meet minimum installation depth.
See also
Very low requirements to installation depth both under and after installation.
In detail, the floating support structure 24 is lowered a bit below normal installation depth.
Please check the correct installation depth also from the instructions of the oil separator.
Absolute encoder with Ethercat with 47 mm installation depth.
For low installation depth and total wetting,.
According to the static frame, the possible installation depth exceeds 8 meters.
Increase the installation depth by 5 mm when mounting on the mounting rail.
Use of 90 quick-turn elbow required to meet minimum installation depth of free-standing dryer.
Perfect Solution for low installation depth requirements, ideal for ceiling installation or difficult ground conditions.
A water pump, type AFRIDEB used for an installation depth of 30 meters.
The maximum installation depth is 150m under the static water level.
The motion / brightness sensor FBH55 requires no installation depth behind the mounting plate.
The installation depth is 90 mm, without taking into account the connection jacks and plugs.
Lift / sliding system with 76 mm installation depth.
Smallest installation depth of 4 cm.
The recommended minimum installation depth is 0.5 m.
The installation depth is only 35 millimeters!
Installation depth 500 mm behind the machine, no interference area on.
The installation depth of the wave. com4 touch operating element is 36 mm.
You'll also be interested in:
Examples of using Installation
Show more
Tools required for installation not supplied
Installation varies depending on your building construction
Continuation of the installation of electronic access control
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
