Examples of 'internal stresses' in a sentence
Meaning of "internal stresses"
Internal stresses: pressures, tensions, or conflicts that exist within a person, organization, or system
How to use "internal stresses" in a sentence
Basic
Advanced
internal stresses
Reduction of internal stresses caused by extrusion or machining.
Iraq suffers from significant internal stresses.
Integration of internal stresses on the surface.
Internal stresses in the galvanic coating.
They are the cause of internal stresses and solidifications.
Deviation of the line of shearing due to internal stresses.
The internal stresses are thus minimized.
Relaxation reduces macroscopic internal stresses.
Reducing internal stresses in ceramic materials.
Stress relieving with a view to reducing internal stresses.
These internal stresses are typically compression or tensile stress.
It constitutes a measure of the internal stresses.
Internal stresses are therefore generated within the complex structure.
This process causes internal stresses.
This leads to internal stresses which threaten the lifespan.
See also
Practically without internal stresses.
Internal stresses are characterized by a deviation from the line of shearing.
This is associated with the internal stresses in the material.
These internal stresses may cause stress cracks on the surface.
Practical without internal stresses.
Such internal stresses may vary in intensity within the extruded sheet.
Measurement of residual internal stresses.
In this way internal stresses within the fiber cement sheet are reduced or avoided.
Heat treatment carried out in order to reduce internal stresses in steel.
This process relieves internal stresses and softens the stainless steel.
The structure therefore has no curvature and therefore no internal stresses.
Permanently relieves the internal stresses created during manufacturing.
In an extreme case the piece may be broken by these internal stresses.
This operation is designed to relieve internal stresses caused by machining or forming.
The uniform thermal environment ensures printed inductors are free of internal stresses.
Study of internal stresses.
Also important for plate quality are separations which occur as a result of internal stresses.
But it was experiencing severe internal stresses regarding how to organize new members.
Talking about our problems with people you trust relieves internal stresses.
It is therefore clear that the internal stresses are much lower within the collet.
The heat treatment as described herein may relieve some of these internal stresses.
The valve may be unstressed or have minimal internal stresses in the natural configuration.
Undesirable internal stresses and interfaces within the crimped member arise as a result.
There is no mechanical fastening together and internal stresses are thus avoided.
Internal stresses relaxation increase creep rate while dislocation structure annihilation remains negligible.
Multilayer structure with controlled internal stresses and making same.
Avoiding internal stresses helps to produce better parts with the same amount of required material.
This step is designed to release the internal stresses of the batteries.
Furthermore, if internal stresses persist in the welds, cracking can occur in the seal.
None of the above mentioned publications relate to internal stresses in platings.
Discs that did not evidence internal stresses on examination under polarised light were rejected.
Relaxation stops free shrinkage and relieves internal stresses in the film.
This can impose very high internal stresses on the handrail causing a number of problems.
During drying large shrinking occurs creating internal stresses into the gel.
The Release of internal stresses This process is located in IPU.
You'll also be interested in:
Examples of using Stresses
Show more
Mitigating the stresses that drive change
Stresses the need for general disarmament
My life coach always stresses the importance
Examples of using Internal
Show more
I can not do an internal examination without asking
Internal services are delivered through operating funds
Strengthening the internal audit staffing capacity
