Examples of 'is cooled' in a sentence
Meaning of "is cooled"
The phrase 'is cooled' is used to describe the act of reducing or lowering the temperature of an object or substance. It indicates that a cooling process or mechanism is employed to remove heat and bring the temperature down. Cooling can be achieved through various methods, such as using refrigeration systems, circulating air or water, or employing cooling agents like ice or liquid nitrogen
How to use "is cooled" in a sentence
Basic
Advanced
is cooled
The unit is cooled by load controlled fan s.
Ensure that the engine is cooled sufficiently.
The whole is cooled and crystallisation is observed.
During this phase the fabric is cooled.
The center is cooled with renewable energy.
Check whether the barbecue is cooled down.
The chamber is cooled to within a few degrees.
It glows brightly until the element is cooled to.
The working fluid is cooled in the radiator.
I prefer not to be hanged before my wife is cooled.
The reaction mixture is cooled in an ice bath.
The tank is cooled down to a corresponding ambient temperature.
The reaction mixture is cooled and filtered.
The pump is cooled by discharging water onto ground.
The finished product is cooled and packaged.
See also
It is cooled by removing steam as pressure is reduced.
The entire mixture is cooled to ambient temperature.
The upper layer of your skin is cooled.
The mixture is cooled and precipitation is observed.
Ensure that the iron is cooled down.
The solution is cooled to a certain level of supersaturation.
Wait until the oven is cooled down.
The solution is cooled and forms a precipitate.
Clean the bakeware after it is cooled completely.
The mixture is cooled and evaporated to dryness.
Preferably the expanded material is cooled at discharge.
The mixture is cooled down then evaporated.
Disconnect plug and wait until it is cooled down.
The welded zone is cooled after being deformed.
Do not touch glass until it is cooled.
The reaction medium is cooled to room temperature.
During the cooling mode the air is cooled.
The clinker is cooled and then pulverized.
In these applications the motor is cooled by the belt.
The mixture is cooled and dichloromethane is added.
Program is paused when the laundry is cooled adequately.
The mixture is cooled down to ambient temperature.
Crust becomes soft when it is cooled.
The reaction mixture is cooled to ambient temperature.
The gas is trapped in the pellet when it is cooled.
The reaction mixture is cooled and degassed.
Reaction is cooled and all solids are collected by filtration.
The fluid obtained is cooled with stirring.
Cryoluminescence is the emission of light when an object is cooled.
The solution obtained is cooled to room temperature.
Note that neither of these is cooled.
The solution is cooled until turbidity is obtained.
The transmission oil cooler is cooled by raw water.
The mixture is cooled to rt and subjected to prep.
The resulting preparatory material is cooled and recovered.
You'll also be interested in:
Examples of using Cooled
Show more
The air is then cooled down by evaporation
The cooled or conditioned goods have been unloaded
Clean the air cooled condenser fins
