Examples of 'is de-energized' in a sentence
Meaning of "is de-energized"
De-energized refers to a state where electrical equipment or systems have been disconnected from the power source, making them safe to work on. It is a term commonly used in the field of electrical engineering and maintenance to ensure the prevention of accidents or electric shocks during repairs or maintenance activities
How to use "is de-energized" in a sentence
Basic
Advanced
is de-energized
Ensure that the busbar is de-energized before proceeding.
Relay is de-energized when drive receives a stop command or a fault occurs.
The output is open when the device is de-energized.
The relay is de-energized when the set scenario occurs.
Never assume any equipment is de-energized.
When the solenoid is de-energized no hydraulic fluid is supplied from the valve.
Panel connections should be made only when the unit is de-energized.
Ensure the console is de-energized at the circuit breaker which supplies the console.
Always use a properly rated voltage-sensing device to confirm equipment is de-energized.
Zone Request input is de-energized Zones are satisfied.
When the door is opened the rotor stops and the heater is de-energized.
When it is de-energized it goes to its.
To avoid electric shock, dismantle the measuring insert when it is de-energized where possible.
The heating system ( 35 ) is de-energized at the end of the second cooking step.
A pressure balanced condition of the valve assembly exists when the valve actuator is de-energized.
See also
That is, the cylinder is de-energized to lower the movable element-engaging block 13.
Pantograph-equipped locomotives must not run through a section break when one side is de-energized.
P27=1 relay is de-energized only in alarm conditions that will stop the compressor.
Burner turns on and Zone Control is de-energized.
The compressor 29 is de-energized to stop the supply of compressed air to the air nozzles 11.
When an alarm activates, the corresponding relay coil is de-energized.
RO=1 Transistor output is de-energized ( opened ) and relay output is energized.
Prior to turning of a steering wheel, the electric motor is de-energized.
The electric motor is de-energized.
In its static state, thus in the disengaged state, it is de-energized.
Help verify that a panel, circuit or device is de-energized before touching.
When the power consumption exceeds a pre-stored profile the gate is de-energized.
To this end, it may be that one of die apparatuses is de-energized completely.
When the temperature sensing element 3 thus melts, or breaks, the combustion control circuit is de-energized.
This will allow for rotation by that amount if φ-1 is de-energized and φ-2 energized.
A spring will return the valve to its “ normal ” position when the solenoid is de-energized.
It is not surprising. The transponder is de-energized.
When a designated number of the coins C are dispensed, the electromagnetic actuator 318 is de-energized.
When the internal combustion engine 3 is running, the electromagnetically operated clutch 9 is de-energized and disengaged.
When the current exceeds the pre-stored profile the gate is de-energized.
Additionally, in the illustrative embodiment, the outer heating element 54 is de-energized first.
When equilibrium of currents within the oscillators 2 and 3 is established, the thyristor 10 is de-energized naturally.
DO=1 Transistor output is energized ( closed ) and relay output is de-energized.
You'll also be interested in:
Examples of using De-energized
Show more
Relay contacts are shown in the de-energized position
Only work on de-energized electrical panels
Some of the industrial regions were temporarily de-energized
