Examples of 'is not reset' in a sentence
Meaning of "is not reset"
is not reset: Refers to a state or condition where a device, system, or mechanism has not been restored to its original settings, parameters, or configuration. This phrase is often used in discussions about technology, software, or electronics to convey that a piece of equipment has not been restarted or refreshed
How to use "is not reset" in a sentence
Basic
Advanced
is not reset
It is not reset at the end of the month.
This list assumes the running total is not reset.
The display is not reset immediately.
In some circumstances the history may be considered useful and is not reset.
This score is not reset weekly.
It is not reset when you restore the factory settings.
Thus the atrium is not depolarized and the sinus node is not reset.
Stopwatch Mode is not reset to all zeros.
The message functions will not operate properly if the lamp timer is not reset correctly.
The Text To Speech annotation is not reset when a new document is started.
If the LEDs start blinking, then the Communication Device is not reset.
The value of the Counter variable is not reset when the procedure ends.
The lower stage 75 simply counts the incoming clock pulses from input 72 and is not reset.
FALSE and the watchdog timer is not reset when RE TRIGR was executed from a start up.
Note particularly that AllocCode ( k ) is not reset.
See also
However, this multiplier is not reset if there is a following Avalanche.
If you release the Down button, when RESET is flashing, the value is not reset.
Another important point, your phone is not reset when installing an update.
Problems around the tonearm automatic ( auto return ), Player does not start - tonearm is not reset.
As a result, reference capacitor CR is not reset as the repetitions are executed.
If a complete packet is ready, B READY indicator flip flop 69 is not reset.
If this bit is 0 the RLC entity is not reset during the cell change.
The switch 14 does not close and the integrator 8 is not reset.
During heating operation, if the float switch is not reset even after the 5 minutes operation, 5.
However, since the electro-magnet is de-energised, the system is not reset.
Metrologically significant data is not reset unless SW2-1 is also set to ON.
Only the “ Oil Change Service ” indication is reset, the “ Inspection ” indication is not reset.
Note that the “ Language ” setting is not reset by this method.
Therefore the busy signal POCSBY is not reset and remains in the syndrome register 2-13.
U The system PIN is not reset.
In the second phase, the High Slope Counter is not reset by a low slope.
The TOT . CNT is not reset.
You'll also be interested in:
Examples of using Reset
Show more
You can reset it as soon as you are done here
Programming the volume reset to factory settings
Reset the machine by reducing the load
Examples of using Not
Show more
I am not really sure what that thing was
Use where walls are not perpendicular to base
I am not saying that you do not care
