Examples of 'is shown in phantom' in a sentence
Meaning of "is shown in phantom"
is shown in phantom - This phrase implies that something is presented or demonstrated in an elusive or ghostly manner
How to use "is shown in phantom" in a sentence
Basic
Advanced
is shown in phantom
This outboard position is shown in phantom lines.
Rod 3 is shown in phantom for purposes of illustration.
An example of the embodiment is shown in phantom in Fig.
This is shown in phantom lines in Figure 4.
Again, the outer sheath is shown in phantom line.
This is shown in phantom line in Figure 2.
Here again the relative position of the work piece 40 is shown in phantom outline.
The reset position is shown in phantom or broken lines.
The desired overall thickness of the metal coating is shown in phantom at 456b.
The handle is shown in phantom lines.
For illustration purposes, only an outline of the delivery guide 22 is shown in phantom line.
In Fig . 9 the support frame is shown in phantom at a partially elevated position.
The nested portion 21 of the safety cover 20 is shown in phantom.
That central rib is shown in phantom lines in Figure 4 for clarity.
Note that locating pin 13B is shown in phantom.
See also
Roller 32 is shown in phantom for positional reference.
The tube end inserted into the coupling is shown in phantom lines in Figure 1.
The drive is shown in phantom outline in Fig . 1.
One such longitudinal guide beam 88 is shown in phantom in Figs.
This is shown in phantom by line 55.
The position for achieving the sidewall scan is shown in phantom in Fig . 1.
A damper mass 26 is shown in phantom within each of the damper covers 22.
The initial position of character 41 is shown in phantom at 42.
This ship 12 is shown in phantom since it is not properly a part of the system 10.
The wiper contact 19 is shown in phantom.
Such a filter is shown in phantom and designated with reference numeral 61 in Fig . 4.
The guidewire 70 is shown in phantom.
The preadjusted position of cover 32 relative to pressure plate 34 is shown in phantom.
The mean diameter Dcm is shown in phantom lines in Figure 6.
The fully retracted position of grabber 306 is shown in phantom.
Cylinder block 4 is shown in phantom in Figure 7.
The movement of the pontoons 10 and winch lines 42 is shown in phantom view.
The subject 20 is shown in phantom lines.
The upwardly displaced position of the lid is shown in phantom at 18 ''.
The passage end 69 is shown in phantom against the shaped surface portion 68.
More specifically, the media lead end is shown in phantom at 222.
This also is shown in phantom in FIG . 1.
To facilitate description of the interior of magazine 50, disk 58 is shown in phantom line drawing.
The cylinder 40 is shown in phantom in Figure 2.
Looking next at Fig . 2, outer cylinder 5 is shown in phantom.
The sample to be tested is shown in phantom as reference numeral 68 in Figure 10.
This continuous discharging position of the trigger 80 is shown in phantom in FIG . 4.
The ECL portion of I / O cell 54 is shown in phantom and identified as reference numeral 80.
In Figure 15, the aspiration and irrigation system 38 is shown in phantom for clarity.
Cam member 72 is shown in phantom.
For reference, an automotive vehicle body is shown in phantom at 12 in Figure 1.
An optional rear cover is shown in phantom in Figure 3A at 162.
A second, overlapping pit 121 is shown in phantom dotted lines.
An airbag scrim 24 is shown in phantom.
The advancing stroke of ram 30 is shown in phantom lines in Fig . 3.
You'll also be interested in:
Examples of using Phantom
Show more
Phantom light and colour washout phenomena
It feels like that phantom limb syndrome
Phantom power can be supplied to these inputs
Examples of using Shown
Show more
The world which is shown is certainly brutal
Be shown a flashing light for a short time
You will not be shown an ounce of leniency
