Examples of 'isofix connectors' in a sentence
Meaning of "isofix connectors"
Isofix connectors: Term used in the automotive industry to describe standardized attachment points for installing child car seats. Isofix connectors provide a secure and easy way to install car seats in vehicles equipped with Isofix anchorages
How to use "isofix connectors" in a sentence
Basic
Advanced
isofix connectors
Extract the isofix connectors using the front button.
Never install the seat by the Isofix connectors only.
Both isofix connectors will release from the vehicle.
Installing with additional Isofix connectors.
The ISOfix connectors will appear at the back of the base.
Shoulder pads with non-slip material Telescopic Isofix connectors for an easy installation.
Click the ISOfix connectors on to the ISOfix points on the vehicle seat.
Push the switch on each side and push the ISOfix connectors into the base . 40.
Release the two isofix connectors by pulling the front lever coloured red.
Figure 8, Seat which is non-rotatable, showing the fixing between the belts and the Isofix connectors.
Make sure the Isofix connectors are retracted.
The Isofix connectors can be pushed in without pushing in the push button.
The plastic guides for Isofix connectors shall be positioned as shown.
The Isofix connectors from your baby or child car seat fit on to these.
Remove the caps from the ISOfix connectors by pressing down the ISOfix release buttons . 8.
See also
Both Isofix connectors are securely attached to the Isofix anchor points.
On some car seats, the Isofix connectors are part of the seat itself.
The ISOfix connectors are released when the indicators show RED 7.
These guides for the Isofix connectors must be positioned as shown in F5.
The IsoFix connectors and the Headrest-fix system have been designed to improve stability.
Never use the Isofix connectors in booster configuration.
Click the ISOfix connectors in the ISOfix anchorage of the vehicle . 32.
Pull out the iSofix connectors ( w ) as far as possible.
Release the ISOfix connectors by pressing the release mechanism on the ISOfix connectors . 39.
Make sure that both Isofix connectors are securely attached to thei Isofix anchor points.
Disconnect the Isofix connectors by pressing the central button on the support leg 14.
In this case the Isofix connectors 4 can rotate only limited degrees downwards.
Line up the Isofix connectors with the Isofix guides 6.
Click both Isofix connectors into the Isofix anchor points 7.
VERY IMPORTANT, the Isofix connectors must be considered as per additional fitting only.
In figures 4A the Isofix connectors 4 are fully retracted within the recess in the base 1.
Release the two isofix connectors by pulling the front lever ( coloured red ) fig.18.
You'll also be interested in:
Examples of using Connectors
Show more
Power connectors are located below the servodrive
Plug in the aileron connectors into receiver
The connectors are secured using a friction system
Examples of using Isofix
Show more
This is an isofix infant child restraint system
The seat fitted on its ISOfix base
This is an isofix safety restraint device for children
