Examples of 'isolating valve' in a sentence
Meaning of "isolating valve"
Isolating valve: A device used to control or stop the flow of a liquid or gas in a pipe or system by isolating a specific section or component
How to use "isolating valve" in a sentence
Basic
Advanced
isolating valve
Isolating valve downstream of the equipment is closed.
Bellows sealed isolating valve.
Isolating valve in the deaeration line is closed.
The connection to the water supply system must have an isolating valve.
Install isolating valve in cold water line as shown in illustra.
Preferably an accumulator pressure sensor is disposed between the accumulator and the isolating valve.
The isolating valve 9 is closed by default.
In addition excess heat dissipation from the solenoid of the isolating valve may occur.
The isolating valve may comprise a solenoid-operated valve.
This duct is provided with the isolating valve 2.
An isolating valve and the same component of NovaSeal ™ type may also be provided thereon.
The default setting of the isolating valve 8 is closed.
Open isolating valve . Isolating valve upstream of the equipment is closed.
The withdrawal circuit includes at least one isolating valve and a pressure regulator ; and.
Install isolating valve in cold water line as shown in illustration “ Mounting the appliance ”.
See also
Fuel particle separator disposed upstream from a boiler, and provided with an isolating valve member.
The secondary isolating valve - To assist in setting the downstream pressure on no-load conditions.
It includes a door 7 for introduction and is separated from the module B by an isolating valve 8.
Air-operated isolating valve.
An isolating valve can be fitted on the upper part of the shaft 22.
Figure 3 is an expanded view of part of the pressure isolating valve 10.
The " return " isolating valve is equipped with a calibrated orifice which has two functions,.
If no multi-way valve is available, an isolating valve can also be used.
An isolating valve 10 enables the circuit 9 to be isolated from the enclosure 1.
Each downstream insulating device is connected to the valve 92 via its isolating valve 40.
Figures 1 and 2 are representations of a pressure isolating valve according to the present invention generally designated 10.
The outlet of the pressurized gas source 22 is equipped with a manually actuated isolating valve 23.
FIGS . 2 and 3 show the isolating valve member in the closed position.
Further, even after the pump halt condition established, the isolating valve 35 is closed.
The isolating valve 25 of the second duct 15 is preferably a solenoid valve.
The absence of air requires the closure of the isolating valve ( 8 ) during the heating.
The isolating valve 14 on the side of the tanks 3 can preferably only open,.
The opposite end of containment vessel 1 communicates via an isolating valve V 5 with a separator 6.
The three-way isolating valve ( 6 ) must not be used to restrict the flow rate!
It is, however, arbitrary to execute the control to open the isolating valve 35.
The pressure isolating valve 10 has a hopper 12 vía which powder and / or granular material is fed.
A method according to any preceding claim, wherein the isolating valve ( 62 ) comprises a slide valve.
FIG . 2 shows the isolating valve member 21 in the closed position.
FIG . 3 is an expanded view of part of the pressure isolating valve 10.
You'll also be interested in:
Examples of using Isolating
Show more
Our lab is isolating the virus as we speak
The solution to this is using an isolating transformer
Close the isolating valves on the manifolds
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
