Examples of 'isopar' in a sentence
Meaning of "isopar"
isopar (noun) - Isoparaffinic hydrocarbons used in industrial applications such as solvents and fuel
How to use "isopar" in a sentence
Basic
Advanced
isopar
Isopar is a trade name for a volatile hydrocarbon.
Alternatively the dispersion in Isopar can be used.
The Isopar H and the propylene carbonate may have caused the greasy feel.
A suspension of the capsules in Isopar is obtained.
Isopar is a trademark of Exxon Corp.
The difference was that the Isopar H was replaced with heptane.
The Isopar materials are isoparaffinic solvents whose characterizing properties are set forth in Table 2 below.
A suitable solvent is the paraffin solvent Isopar sold by Exxon Chemical Company.
Additionally the isopar flames were introduced into this show during the " In Summer " sequence.
The product of example 1 were redispersed in Isopar isoparaffinic solvent.
Isopar M, sold by the company Exxon, is a good example.
An example of a preferred non-aromatic or low-aromatic diluent or carrier is Isopar I.
A volume of hydrocarbon solvent, Isopar E, was then added to the silica to generate a slurry.
The supernatant was decanted, and the remaining pigment was washed with Isopar E and centrifuged.
In all cases, the substitution of Isopar G for the other oil was on a volume basis.
See also
An example of an aliphatic solvent mixture is Exxon Isopar K ® solvent.
In each case, Isopar G was used as the oil.
The methanol was removed by distillation to give a fine dispersion of Mowilith CT5 in Isopar J.
The solid was resuspended in Isopar E ™ and filtered.
Chronic effects Isopar G has shown negative results in several mutagenicity tests {1}.
The physical property of Isopar I is as follows,.
Of the 125 % isopar solution is added to 2 g of the dried powder obtained as described previously.
An example of a commercial product is Isopar I ™ which is available from Exxon.
Measured amounts of 1-octene are added to the reactor containing about 1442 g Isopar E as solvent.
The quantity of the Isopar I derived liquid generated as gas was 0.82 µg.
The polymerization conditions of Example 1 were substantially repeated using Isopar E mixed aliphatic solvent ( solv . ).
In the presence of Isopar G, there is 90 % transfer, and the copy image is clear.
The copolymer was blended with 336 g of the aforementioned Isopar M hydrocarbon.
Suitable solvents are pentane, hexane, heptane, Isopar E, isooctane, cyclohexane, and methylcyclohexane.
The resulting solid was washed with 500-milliliter portions of toluene, Isopar G, and hexane.
This composition is prepared as in Example 11, substituting Isopar H for isododecane during processing.
Table 11.1, Composition of copolymers solutions in apolar hexane and in Isopar V.
The bottle was rolled for 2 h, then 250 g of Isopar E was added to the pigment mixture.
This vacuum / solvent addition cycle is repeated, with 4 L of solvent removed and 5 L of Isopar E ™ added.
Preferred hydrocarbons are benzene, xylene, toluene, cumene, ethyl benzene, isopar E and petroleum ether.
Examples of commercially available organic solvents include Aromatic 150 ( from Exxon ) and Isopar L ( from Exxon ).
