Examples of 'isopentane' in a sentence
Meaning of "isopentane"
Isopentane is a noun referring to a volatile liquid hydrocarbon compound with the formula C5H12
Show more definitions
- An aliphatic hydrocarbon with the chemical structure CH₂CH₂CH(CH₃)₂; isomeric with pentane and neopentane.
How to use "isopentane" in a sentence
Basic
Advanced
isopentane
The isopentane was then added to the mixture.
Preference is given to a mixture of isobutane and isopentane.
Isopentane is practically the only product of the reaction.
An inert hydrocarbon such as isopentane was used as a carrier medium.
Isopentane or hexane condensing mode was used to control static.
This procedure using isopentane is repeated.
The advantageously preferred hydrocarbon is isopentane.
They are conserved by freezing in isopentane cooled with liquid nitrogen.
The cocatalyst is first dissolved in isopentane.
Isopentane is added to the fuel to increase the vapour pressure.
The volatile liquid comprises isopentane.
Isopentane vapour is then pumped into the processing chamber.
Typically the expansion agent is isopentane.
Isopentane and hexane are preferred.
Additional dilution was performed by adding isopentane to the mixture.
See also
Isopentane was substituted for the isobutane diluent for ease of handling.
They can be separated from solvents like isopentane.
Isoprene can also be produced from isopentane by a double dehydrogenation.
The crystals are collected by filtration and rinsed using isopentane.
The use of isopentane as liquid medium is particularly advantageous in this respect.
The cooling fluid is isopentane.
The isopentane being added to promote partial condensation of the recycle stream.
Appropriate gases include for example alkanes such as isopentane.
Isopentane was used as a flush in the feed line to the reactor as well.
Particularly preferred is isopentane.
The isopentane can optionally act as an eluent for the separation section.
Preferred solvents for the tetravalent titanium compound are hexane or isopentane.
The isopentane has cooled when the bottom of the glass is white.
Blocks were submerged into isopentane chilled with dry ice until frozen.
This solid is then filtered and rinsed with a minimum amount of isopentane.
To a flask containing anhydrous isopentane is added the impregnated silica described above.
Additional dilution of the catalyst composition was performed by adding isopentane to the mixture.
Isopentane is an extremely volatile and extremely flammable liquid at room temperature and pressure.
The composition utilises a volatile hydrocarbon such as isopentane to provide a gel structure.
The isopentane is added to provide additional heat capacity to the reactor recycle gases.
The right hemisphere is cut out and frozen by isopentane cooled in liquid nitrogen.
Isopentane was decanted again and mineral oil added to the mix tank followed by agitation.
The relatively higher molecular weight hydrocarbons such as isopentane and hexane are preferred.
The effect of allowing liquid isopentane into the process chamber is to disrupt the process.
Immunohistochemical analysis was carried out by quick freezing lobes in isopentane cooled in liquid nitrogen.
Degassed and dried hexane or isopentane solvent was added to adequately suspend the supported catalyst.
This is the more particularly problematic when the feed contains only a little isopentane.
The system was mixed thoroughly and then isopentane was removed by heating the reaction vessel.
The shell of these microspheres comprise acrylonitrile whereas the volatile liquid comprises isopentane.
Hexane, isobutane and isopentane are especially preferred.
The DEAC modification was conducted in anhydrous hexane or isopentane.
Use of n-pentane or isopentane or mixtures thereof is especially preferred.
The precursor is introduced into the polymerization zone using both isopentane and nitrogen as a carrier.
Further isopentane and n-pentane are considerably cheaper than cyclopentane.
The preferred solvent for MAO is toluene and that for MMAO is isopentane.
