Examples of 'jacket temperature' in a sentence
Meaning of "jacket temperature"
jacket temperature - the ideal or recommended temperature for a jacket to be worn comfortably
How to use "jacket temperature" in a sentence
Basic
Advanced
jacket temperature
The jacket temperature was controlled using hot oil.
The reaction temperatures were adjusted by the jacket temperature.
For other mixers the fluid jacket temperature is constant until cooling begins.
The reaction temperature was adjusted by controlling a jacket temperature.
Increasing the jacket temperature had no significant effect on the PVP granulation step.
The reaction temperature was controlled by the jacket temperature.
The jacket temperature of the quench flask was controlled with Forma Scientific circulating bath.
The one parameter that did improve crystallization was changing the jacket temperature.
The jacket temperature is increased at point b ₁ in preparation for the second step.
The solution was cooled to ambient over 13 hours vía the jacket temperature control.
The jacket temperature in the 10 liter GRAL was controlled using a circulating water bath.
The compounder jacket was supplied with a fluid to provide a jacket temperature listed in Table 1 below.
The jacket temperature was quickly cooled down to 0°C to control the strong exothermic event.
The slurry was stirred and the jacket temperature was set to 0°C.
Once the jacket temperature was reached, the flask was digested for an additional 4 to 6 hours.
See also
Heat the mixture slowly using a reactor jacket temperature of 75 °C.
Simultaneously the jacket temperature of the reactor is raised to 80 °C.
The slurry was acidified and the temperature was increased by jacket temperature up to 70°C.
The jacket temperature was controlled so that the inside temperature became 70°C.
After the generation of polymerization heat was observed, the jacket temperature was controlled to 75°C.
The crystallizer jacket temperature is maintained at about 55°C by use of a constant temperature circulating bath.
The product was dried under a vacuum with the jacket temperature set point at 45 °C.
The jacket temperature of the 600 liter GRAL was controlled using an in-house cooling system.
The fractions were collected and concentrated under vacuum with a maximum jacket temperature of 30 °C.
The water jacket temperature is then reduced to allow the liquor to cool to about 70°C.
The control does not allow the steam jacket temperature to exceed 120 C.
The reactor jacket temperature was maintained at below 35°C for the duration of the carbonation reaction.
Second Granulation, The second granulation of particles was conducted with the jacket temperature set at 15°C.
The jacket temperature was reduced to 35°C and the DMSO was allowed to cool.
The solution was cooled by decreasing the jacket temperature by 10°C/h.
The reactor jacket temperature was then set to 65 °C.
The mixture was distilled to dryness, maintaining a maximum jacket temperature of 40 °C.
The jacket temperature of the reactor is raised to about 60 °C.
The unit was sealed and the jacket temperature was set to 80°C.
The jacket temperature is set to 10°C for an overnight hold.
The product was dried on a rotary evaporator for 2 h at jacket temperature = 60°C.
The cooling jacket temperature was initially adjusted to 41°C.
The inner temperature of the reactor was adjusted to 90 ± 3°C by the jacket temperature.
A jacket temperature was adjusted so that a polymerization temperature might be 150°C.
Once the transfer was complete, the vessel jacket temperature was set to 25 °C.
The jacket temperature was then raised to 100°C to begin the distillation.
The temperature set point is fixed at 75 ° C. and regulated by the jacket temperature.
During heating, the jacket temperature was not allowed to rise above 35 °C.
The clear solution is concentrated under house vacuum at 50°C jacket temperature ( Tj ).
The jacket temperature is increased such that the internal temperature is 155°F.
The resulting solid was dried on a rotary evaporator for 3 h at jacket temperature = 60°C.
During the addition, jacket temperature was adjusted to 5 °C in order to maintain batch temperature below 30 °C.
Ethyl acetate was removed at 35 torr where the reactor jacket temperature was raised to 65 °C.
The jacket temperature is adjusted to 50°C and ca 80 % of the toluene stripped at reduced pressure.
The inner temperature of the reactor was controlled within 90 ± 3°C by the jacket temperature.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Jacket
Show more
You are in a white jacket with a butterfly pin
A jacket and photo with the team
That leather jacket you always wore
