Examples of 'kerf' in a sentence
Meaning of "kerf"
kerf (noun) - the width of a cut or groove made by a saw or cutting tool in a piece of material such as wood or metal. The kerf size is important in woodworking and fabrication to ensure precision and accuracy in cutting
Show more definitions
- The act of cutting or carving something; a stroke or slice.
- The groove or slit created by cutting or sawing something; an incision.
- The portion or quantity (e.g. of wood, hay, turf, wool, etc.) removed or cut off in a given stroke.
- The distance between diverging saw teeth.
How to use "kerf" in a sentence
Basic
Advanced
kerf
I did find kerf marks on his right acromion.
I will just study the kerf marks.
Replace the kerf plate when worn.
Never use saw without kerf plate.
Replace the kerf board when worn.
Do not operate the machine if the kerf.
If the kerf plate is worn it must be replaced.
Make sure to use the kerf plate.
Replace the kerf plate when it is worn.
Would have left broader kerf marks.
These kerf marks were made by a heavy blade.
It concerned making a kerf with an interrupted cut.
I just finished comparing the kerf marks.
Adjust the kerf plate as described below.
Chisel down into the kerf at.
See also
Adjust the kerf boards as described above.
Place the chisel into the hole kerf.
I found kerf marks on the right femur.
Only use thin kerf blades.
Kerf marks show that the blade was serrated.
Loosen the six kerf plate adjusting screws.
Kerf width width of cut made by the blade.
The mold gave us kerf marks on the blade.
The kerf must be free of obstructions.
Progression of feed and back movement up to kerf diameter.
The kerf should be made in the following way.
Keep cord away from blade and kerf.
The kerf is the cut created by the tool.
Gradually increase water fl ow to fl ush sand from kerf.
Kerf compensation is still required as for all cutting.
Make repeated passes along the kerf if necessary.
To adjust the kerf plate for the desired blade.
Accidental burning of the heating gas in the kerf.
On this side the kerf is cut in.
And the kerf marks at the separation points are consistent.
Make allowance for the kerf when measuring wood.
Wedge the kerf open with a flat screwdriver or wooden.
Never use your saw without the kerf plate.
Here is a kerf compensated inlay.
When the blade is clamped or bound tightly by the kerf or.
I know what kerf marks are.
Stick flat blade screwdriver or wedge into the kerf.
The size of the blade kerf is exaggerated for clarity.
Regularly clean the area below the kerf plate.
The kerf plate must remain in good condition at all times.
Do not use this saw without a kerf plate installed.
Kerf floor is uneven.
They are gonna lose so much meteorite due to kerf loss.
Remove the kerf plate and clean the area below.
Theyre gonna lose so much meteorite due to kerf loss.
