Examples of 'kgf' in a sentence
Meaning of "kgf"
kgf (noun) - Kgf is an abbreviation that stands for 'kilogram-force', which is a unit of force in the gravitational metric system. It is commonly used in engineering and physics to measure force
How to use "kgf" in a sentence
Basic
Advanced
kgf
This is the real video of kgf.
Kgf kilogram force.
Load applied per foot Kgf.
A higher expression of kgf in early cysts was also found in comparison to advanced cysts.
Express this thrust in N and kgf.
The load in Kgf was measured at the break.
Table 2 presents results of the maximal strength performance in the control and experimental phases kgf.
Where F is in kgf and d is in millimeters.
Use of Newton as unit, in replacement of kgf.
Readings were recorded in KgF Kilogram-Force.
Tensile, Schopper tensile reading in kgf.
A constant pulling force of 40 kgf was applied downstream from the corrugator by a caterpillar.
Ps individual 's weight kgf.
Adjust the pressure to 45 kgf with the handle on the bottom right side.
Thisstring is placed in position under a fixed tension of 20 kgf for example.
See also
Required Kgf at 6 bft.
In view of the grindability, the hardness is preferably at least 20 Kgf.
Adjust alternator pulley so belt ( B ) deflects 7 to 9 mm with a 10 kgf push at midspan between pulleys.
The strength found varied at about 2.2 points in kilogram-force kgf.
The resultant F is approximately 6.5 kgf or less.
He now applied for recognition as a " Fighter against Fascism " " Kämpfer gegen den Faschismus " / KgF.
The notched Izod impact value of the molded product was 21 kgf cm / cm.
The strength scale in the dynamometer is described in up to 200 pounds and / or 90 kilograms kgf.
Initial Load - kgf.
Cephalad advancing force of catheter C * cos? kgf.
The superabsorbent material has a Gel Integrity Index of at least about 1.5 Kgf x mm.
The mold pressure was set to 70 kgf.
This pressure is translated into a force of 785 kgf.
In this particular embodiment, the magnitude of the attractive force is 2.5 kgf.
This is thus a generable traction force per magnet which can be generated of 8 x 7 kgf = 56 kgf.
Radial forces may be applied to press the discs together with loads of 0-200 kgf.
The strings 128 are then fixed on their fasteners under a standard assembly tension, for example 20 kgf.
These non-wovens are also characterized by their high burst strengths, exceeding 0.1 Kgf.
