Examples of 'knob can' in a sentence
Meaning of "knob can"
While the exact context of this phrase is unclear, 'knob' can refer to a handle or a small round protuberance used for controlling or operating various objects or devices. 'Can' can imply the ability or possibility of using the knob for a specific purpose
How to use "knob can" in a sentence
Basic
Advanced
knob can
Setting the thermostat knob can be done by rotation.
The knob can be turned in either direction.
It is also contemplated that a structure other than a knob can be used.
The knob can be removed to facilitate cleaning.
The zero position of the control knob can largely prevent this.
The knob can be adjusted to any position in between.
Failure to lock each knob can also have the same effect.
Knob can cause damage to the pilot valve.
Setting the thermostat knob can be done practically with a coin.
A knob can set the speed of the conveyor.
Information on the audio system control knob can be found in the separate operating instructions.
The knob can be positioned at any point on the dial.
The illustration below shows how the air adjustment knob can control the spray pattern.
Each control knob can be set to any required.
Breast works used by both sides in defense of Signal Knob can still be seen.
See also
The knob can be moved into the following positions.
The Tempra Plus Temperature adjustment knob can be set to.
The knob can also be placed between the clicks.
Starting from the 0 ( off ) position, the knob can be turned clockwise to the following settings.
The knob can also be removed while the cooking element is on.
BREW / DRAIN Selector Knob, This knob can be found on the top center of the brewer.
The knob can be raised and lowered to hide away by pressing it down.
Jug lid, the inner knob can be removed for cleaning.
The knob can be moved into the following positions depending on vehicle equipment.
During motion, the speed knob can be turned to directly adjust speed.
Knob can now be turned to the ON position.
The cycle selector knob can be turned in either direction.
Knob can be adjusted for different time. X/Y can be control smoothly.
The elevation knob can be zeroed the same way.
Locking the operating knob The “ turn and push ” operating knob can be locked.
The tuning knob can also be used to tune stations.
A tension adjustment switch 76, such as an adjusting knob can be located on the tensioner 10.
This knob can be used to adjust the volume of the recording.
After freezing the knob can be set to the initial position.
A door knob can be equipped with a capacitive sensor to sense its use.
The function selector knob can be rotated to the right or to the left.
The same knob can also be used to select the functions described in the table.
Only the speed control knob can be used to turn the machine on and off.
Each knob can be individually assigned to a different MIDI parameter.
The zero adjustment knob can be used to adjust the scale pointer.
The knob can be used to shut-off the circuit zone controlled by the valve.
Variable control knob can be released after the pilot flame lights.
The knob can be moved ( depending on vehicle equipment ) into the following positions » Fig . 57.
The thermostat knob can be adjusted from setting 1 to 7.
The tension knob can be adjusted to control the resistance of the pivoting motion.
The Timer control knob can be adjusted up to 90 minutes.
The VOLUME knob can be assigned to control different MIDI parameters using the computer editor.
The speed lock knob can also be preset to limit the trigger travel.
The air knob can be adjusted from Quick Freeze to Quick Freeze mode.
Similarly, the knob can be removed while the hotplate is on.
