Examples of 'laboratory temperature' in a sentence
Meaning of "laboratory temperature"
laboratory temperature - This phrase denotes the specific temperature conditions required or maintained in a laboratory setting for conducting experiments or preserving samples
How to use "laboratory temperature" in a sentence
Basic
Advanced
laboratory temperature
The measurement was carried out at laboratory temperature.
Laboratory temperature controllers.
The atmospheric pressure and laboratory temperature are noted.
The covered and uncovered tailings were subjected to cyclic wetting and drying, at laboratory temperature.
The mixture was cooled to laboratory temperature and filtered.
The resulting sticks were evaluated after at least 24 hours at ambient laboratory temperature.
Everything was initially at laboratory temperature before washing with hydrochloric acid.
These two stages are carried out at laboratory temperature.
The sample is at laboratory temperature and is maintained under anaerobic conditions.
The reaction was performed at laboratory temperature.
The laboratory temperature during those tests was about 23°C.
The samples need to equilibrate to laboratory temperature before handling.
Stirring is subsequently maintained at 10 ° C. for 1 hour 30 minutes and is then left at laboratory temperature.
Each stick was kept at ambient laboratory temperature overnight before the measurement was made.
The mixture was stirred and allowed to warm to laboratory temperature.
See also
Dimethylformamide, at a temperature from laboratory temperature to the reflux temperature of the reaction mixture.
After incubation of the test solution at ambient laboratory temperature ca.
To perform the examination, the laboratory temperature was maintained between 22 and 24 ºC.
The solution is left to stand for 4 hours at laboratory temperature.
Then it was stirred at the laboratory temperature ( about 21 °C ) for several hours.
Homogenize the samples with the glass beads for 15 s on a homogenizer at laboratory temperature.
The mixture was stirred at laboratory temperature for 2 hours.
The laboratory temperature varied between 21 and 24°C during the course of the experiment.
Incubation overnight at laboratory temperature.
At laboratory temperature ( approximately 20 ° C. ) which corresponds to standard test conditions.
The resulting clear solution was allowed to cool to laboratory temperature without stirring.
The mixture is stirred at the laboratory temperature for 6 hours.
Mix the samples with PBS for 5 s on the homogenizer at laboratory temperature.
Mixture was stirred in laboratory temperature for 24 hours.
The absorption capacity was measured 24 h later at laboratory temperature.
The mixture is left stirring at laboratory temperature for 5 hours.
The plates were placed in the dark for 20 minutes at laboratory temperature.
The solution is left for 3 hours at laboratory temperature and dialysed against PBS at +4 ° C.
The plates are left in a dark room 20 minutes at the laboratory temperature.
The mixture is left to stir at laboratory temperature for 5 hours.
In this thesis a device was built to measure the laboratory temperature and humidity.
Incubation 2 min at laboratory temperature.
Then, the mixture was diluted with water, stirred at the laboratory temperature overnight.
The mixture was stirred at laboratory temperature for 45 minutes.
Incubation for 30 min in darkness at laboratory temperature.
This solution is vaporized at laboratory temperature ( 20 " C ) on dry plates.
The reaction was performed at 0°C during the addition, and at laboratory temperature thereafter.
The reaction is carried out for 2 hours at laboratory temperature with intermittent vortex.
The reaction mixture was stirred gradually from -10 °C up to the laboratory temperature for an hour.
It is left in contact at the laboratory temperature for 18 hours.
The viscosity measurements made herein were carried out at an ambient laboratory temperature of about 15°C.
The mixture is stirred at the laboratory temperature for 24 hrs.
The reaction of the 6-bromomethyl derivative was carried out at laboratory temperature for 2.5 hours.
Sodium azide ( 1 equivalent ) was added and the mixture was stirred at laboratory temperature for 1.8 hours.
The mixture is maintained under stirring at -5 ° C. for 1 hour and at laboratory temperature for 2 hours.
You'll also be interested in:
Examples of using Laboratory
Show more
Most laboratory detergents are used at recommended concentrations
Everything that is in the laboratory is for publication
Laboratory and analytical uses of methyl bromide
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
