Examples of 'lamp housing' in a sentence
Meaning of "lamp housing"
Refers to the protective casing or structure that contains a lamp, typically an electric light bulb. It provides support, security, and connection for the lamp and may also include features for adjusting the light output or directing it in a specific direction
How to use "lamp housing" in a sentence
Basic
Advanced
lamp housing
Remove cover to access the lamp housing.
Pull the lamp housing from the model.
The device has an adjustable lamp housing.
The lamp housing may have a variety of shapes.
Please unscrew the lamp housing set screw.
The lamp housing interlock disables the lamp supply.
The pivot point is recessed in the lamp housing.
Screw the lamp housing back into the holder.
Slide the lamp back into the lamp housing.
Remove the lamp housing by pulling out the handle.
Install a new lamp housing.
Close the lamp housing and retighten the screws.
Pull off the lamp housing.
Unique lamp housing individually and flexibly adjustable to your needs.
Insert a new lamp housing.
See also
Clean the lamp housing and the base with a moist cloth.
Be careful not to break the locking tabs on the lamp housing.
Remount the lamp housing and the front panel in the.
Electricity causes the plasma within the lamp housing to glow.
The lamp and the lamp housing may still be hot.
The lamp housing may be opened for installing an upgrade kit or a lens.
It is also possible for one lamp housing to have several windows.
The lamp housing and the lamp base are connected through threads.
The air outlet may be defined in the top of the lamp housing.
The reflector of the lamp housing may be diffusely or specularly reflecting.
The air inlet may be defined in the front of the lamp housing.
Replace the lamp housing and fix it with the set screw.
After the replacement of the light bulb follow instructions in reverse to close lamp housing.
Be sure that the lamp housing is disconnected from the power supply.
Remove the socket with the bulb from the lamp housing in the direction of.
The lamp housing may be configured to be removably attached to the power source.
The sensor must be mounted below the lamp housing for wall installations.
Rotate the lamp housing of the flashlight to concentrate the focus of the light.
Make sure that no water enters the lamp housing and other electrical items.
The lamp housing may be adapted to contain a battery powering the light source.
Be sure that the microscope and lamp housing are disconnected from the power supply.
Each lamp housing has a pair of spaced posts which extended forwardly therefrom.
There may be a snap connection between the optical device and the lamp housing.
Insert a new lamp housing until the lamp housing is plugged into the socket.
Reinsert the holder with the bulb into the lamp housing and turn in the op.
The removal of the lamp housing from the apparatus requires removal of the entire cassette.
Replace the holder with the bulb into the lamp housing and turn in a clock.
The lamp housing and the fixed projection may be integrally formed of the same material.
The light terrace and the lamp housing atop the building are painted red.
Light source modules having different characteristics can not be interchanged within the same lamp housing.
Loosen the two screws securing the lamp housing until the screwdriver goes into a freewheeling condition.
The light source may comprise at least one LED light source in the lamp housing.
The ledes with the heat sink are mounted inside a lamp housing together with a voltage converter.
Normally, the shield is removed once the lamp is installed in the lamp housing.
If an adapter profile or a lamp housing is preferred,.
You'll also be interested in:
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
Examples of using Lamp
Show more
The following lamp caps may be selected
A lamp will light up when switch is turned on
W quartz halogen lamp if used without a filter
