Examples of 'lamp module' in a sentence
Meaning of "lamp module"
A lamp module refers to a component or device that controls lighting fixtures in various electronic systems. It is typically used in automation or smart home setups to remotely control the operation, brightness, or color of lamps. Lamp modules can be wireless or connected to a central control system, allowing users to adjust lighting settings conveniently. This term is commonly used in discussions about home automation or lighting technologies
How to use "lamp module" in a sentence
Basic
Advanced
lamp module
Until the lamp module has been replaced.
Minutes before removing the lamp module.
Remove the new lamp module from its packaging.
Removing and replacing the projector lamp module.
To put the new lamp module into the projector.
Be extremely careful when removing the lamp module.
Not turn on until the lamp module has been replaced.
Lamp module with the.
To finish the projector lamp module installation.
The lamp module may include a storage compartment or a display.
To remove the old lamp module.
Replace the lamp module when the lamp replacement message appears.
Use gloves when touching the lamp module.
Never replace the lamp module with a previously used lamp module.
Alarm and status lamp module.
See also
Automotive lamp module and lighting unit with led lighting element.
Always handle the fragile lamp module with care.
Insert the new lamp module into the projector and tighten the screws.
Means are provided for securing a lamp module to the retainer.
Remove LED lamp module of the center valve by.
This section provides instructions for replacing the projector lamp module.
Lift up the lamp handle and remove the lamp module slowly and carefully.
Note All lamp module screws must be loosened.
Replace the center LED lamp module.
The Lamp Module is monitoring the powerline for a command specifically addressed to it.
If the module is worn out, make sure to order a new lamp module.
A front lamp module and sunshade support for a headliner which comprises,.
Each of the individual lamps 3 always includes only one led in its lamp module.
For incandescent lamp loads, a lamp module or wall switch module can be used.
Do not touch the lampwith your fingers when removing, cleaning and replacing the lamp module.
Remove lamp module, Slowly pick up the lamp module by the handles.
Retaining screws, Use a screwdriver to unscrew the lamp module retaining screws.
Lamp module coding method:.
Reverse steps 1 to 5 to install the new lamp module.
Wires 11 from the led lamp module are connected to the terminal strip 9.
The emitting device 14 may for instance be a halogen lamp module.
Tighten the lamp module retaining screws ( 3 ) to secure the lamp module in place.
Raise the handle and pull out the lamp module slowly and carefully.4.
FIG . 3 is a side cross-sectional view of a conventional high power led lamp module.
Insert lamp module, Carefully insert ( 4 ) the new lamp module.
Turn on the projector and use “ Lamp Reset ” after the lamp module is replaced.
FIG . 2 is a side cross-sectional view of a conventional traffic signal lamp containing a conventional led lamp module.
Baco 22mm diameter Auxibloc Plus series 23EA lamp module with BA9S lamp socket.
You'll also be interested in:
Examples of using Module
Show more
Digital control module with switch input
Module on business finance and financial management
On completion of this module individuals should be able to
Examples of using Lamp
Show more
The following lamp caps may be selected
A lamp will light up when switch is turned on
W quartz halogen lamp if used without a filter
