Examples of 'lamp power' in a sentence
Meaning of "lamp power"
Lamp power refers to the amount of electrical power consumed by a lamp or lightbulb. It is measured in watts and determines the brightness and energy efficiency of the lamp
How to use "lamp power" in a sentence
Basic
Advanced
lamp power
Modelling lamp power up and down buttons.
Claimed equivalent incandescent lamp power.
Adjust lamp power when not in eco mode.
Closed loop control is provided for lamp power.
Lamp power also influences color in tungsten lamps.
This characteristic is utilized to discriminate the rated lamp power.
The lamp power can be controlled.
Irradiating dose is the total lamp power over time.
Lamp power factor for lamps with integrated control gear.
The ballast further includes a lamp power switching means.
Lamp power factor.
Selects duration of delay between product power on and lamp power on.
Hidden desk lamp power bank suitable for any place.
The temperature of the amalgam is determined to a great extent by lamp power.
Lamp power can be continuously monitored and the signal displayed or recorded.
See also
The power of this heating device is equal to the lamp power.
The discrimination of rated lamp power may be performed two or more times.
This makes it possible to provide a ballast output power adequate to the rated lamp power.
It is preferable that the lamp power switching means should include a verifying means.
You can adjust lamp position either before or after adjustment of Lamp Power or.
It is preferable that the lamp power switching means should further include a lamp aging monitor.
On this floor, you can see the old lamp power system.
LED lamp power.
However, the lamp output parameters vary with the rated lamp power.
As a result, the lamp power will be reduced.
In general, however, the frequency tends to rise as the rated lamp power decreases.
Hidden desk lamp power supply, the new structure of electricity indicator.
The ECFPr protein was initially photobleached using maximum lamp power for less than 1 min.
The accompanying lamp power is considerably lower, as is the maximum wall temperature.
The micro-controller also provides closed loop control for tight control over lamp power.
In fact, a substantially lower lamp power was attainable when the thermal bridge was used.
FIG . 1 shows an example of a diagram of a conventional fluorescent lamp power supply circuit.
To this end, the lamp power switching means includes a memory and a selector.
Indicator for the power stage or timer setting 3 Control Lamp Power Stage.
In order to compensate this variation, the lamp power switching means includes a rest counter.
LED lamp power supply why constant flow?
Preferably, the dose-rate at a known lamp power is determined and the lamp power measured.
Lamp power rating might be:.
In this way, the dose-rate can be normalized to the lamp power.
In this case, the lamp power switching means includes a monitor, a timer and a lamp discriminator.
Relative lumen output is plotted as a function of lamp power in FIG . 6.
In this case, the lamp power switching means includes a frequency monitor, a memory and a processor.
Referring to this data, the lamp discriminator 220 discriminates the rated lamp power.
The control lamp Power Stage 3 glows during the adjustment.
In this case, the discriminated lamp power is 70W.
When off, lamp power may be adjusted.
The signal VPWR 22 is proportional to, or a function of, the lamp power.
Reduces lamp power consumption by up to 70 % depending on the content brightness level.
The ballast includes a lamp power switching means 100.
Lamp power factor ( PF ) for lamps with integrated control gear.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Lamp
Show more
The following lamp caps may be selected
A lamp will light up when switch is turned on
W quartz halogen lamp if used without a filter
