Examples of 'lampholder' in a sentence
Meaning of "lampholder"
lampholder: a device used to support and connect a lamp or light bulb to an electrical power source
Show more definitions
- A fitting into which an electric lamp can be inserted.
How to use "lampholder" in a sentence
Basic
Advanced
lampholder
The lampholder is aligned at the factory.
Install new bulb using spring loaded lampholder.
Lampholder failures are usually caused by mechanical abuse or by overheating.
Remove bulb by gently pulling up on spring loaded lampholder.
Lampholder plugs were and are rarely fused.
Then the lamp is screwed as usual in the lampholder.
The lampholder may be detachably insertable in the fastening piece.
Verify that the lamp is screwed properly to the lampholder.
Loosen the lens from the lampholder with the help of the appropriate tool.
Remove bulb by gently pushing bulb into spring loaded lampholder.
The lampholder contributes a Industical and antique ambiance to your bedroom or living room environment.
Nominal position of lampholder studs.
The groove is thus suitable for accommodating a hemispherical surface of a retention member of a lampholder.
The lampholder has adjustable legs, so their height can be changed to your liking.
Please choose a lampholder.
See also
Lampholder PBT self-extinguishing and white polyamide.
The result is that light seems to be coming from the lampholder.
Do not install any lampholder closer than 6 ”.
Push the bulb down while pulling the spring activated lampholder up.
The electrode 4 at the lampholder side is connected to the other supply line 15.
The reflector element can be connected with the lampholder in a single piece.
Step 3, Rotate the lampholder so far that the lamp-socket points upwards.
Make sure that the lamp is installed tightly into the lampholder system.
This orifice 2 is intended to receive a lampholder like those depicted in FIGS . 6 a and 7 a.
A good electrical connection can be realised on the protected end portion with contacts of a lampholder.
Retention means of a lampholder as a result have extra large contact surfaces ( see also Fig . 2d ).
Key and counter key means can prevent improper use of a combination of lamp and lampholder.
The lampholder heads have been removed . ".
Do not operate the lamphead if any damage to cables, plugs or lampholder is detected.
These lampholder parts are accommodated in respective cavities 100.
This means that, for example, suitable contacts need only be present on a lampholder.
According to the invention, this lampholder 7 comprises several sections and, in particular, a top section 18.
The construction also achieves that the risk of short-circuits in a lampholder is avoided.
A lampholder 10 as shown in Fig . 1B can provide both of these functions.
The positioning member may be plate-shaped and may carry the contacts of the lampholder.
FIG . 7 a depicts a perspective view of a lampholder 17 for a halogen lamp.
Thereby, the reflector may e.g. have a kink in a plane through the lampholder.
More precisely, FIG . 6 a shows a perspective view of a lampholder for a discharge, or xenon, lamp.
Lamp 10 is consequently fixed inside the reflector 1 by means of the lampholder 7.
Directly insert the LED bulb into the lampholder Fig . 3.
More precisely this FIG . 3 shows a discharge lamp 10 mounted on a lampholder 7.
NOTE, Refer for plug-in lampholder.
Step 3, Insert the lamp in the lampholder.
