Examples of 'latch plate' in a sentence
Meaning of "latch plate"
The phrase 'latch plate' refers to a component or piece used in doors or cabinets that allows them to be securely closed or latched. It is typically a metal plate or piece that interacts with a latch mechanism, such as a doorknob or a latch bolt, to keep the door or cabinet firmly shut. The latch plate ensures proper alignment and engagement of the latch, enhancing the security and functionality of the closure
How to use "latch plate" in a sentence
Basic
Advanced
latch plate
Has a latch plate that locks the vehicle belt.
Replace any belt that has a bent or damaged latch plate or anchor plate.
Has a latch plate that is sewn into the webbing.
Shorten length of lap belt portion slightly by pulling belt through latch plate.
Position the latch plate as close as possible to the anchor point.
Remove the upper hinge and the door latch plate from the refrigerator.
The latch plate is formed with a series of vertically spaced slots.
Rotate the footrest inward until latch plate locks into place on locking bolt.
The latch plate knob should be adjusted prior to installation into the buckle.
The catch arm locking feature may be configured to spring bias the latch plate.
Continue to slide the latch plate up until it clears the folded webbing.
Push the red button on the buckle and remove the latch plate from the buckle.
Slide the latch plate into the buckle until you hear a click.
Damage to the buckle, latch plate or hardware.
Has a latch plate that freely slides along the vehicle seat belt webbing.
See also
Lap / shoulder combination belt with a latch plate.
This belt has a latch plate that slides freely along the belt.
To prevent this problem, he installs a long construction screw behind the latch plate.
Grasp the mini latch plate and pull the belt over the seat.
The cylinder has piston rod which is connected to slidable latch plate 104.
Insert the latch plate into the buckle with the release button facing out.
In one of two places, the latch plate or the retractor.
The latch plate 32 may be configured with a single member or a plurality of members.
Hold seat belts together at latch plate ( a ) then unbuckle.
Optionally, the latch plate is secured to an inner surface of the rear wall.
Figure 1 shows a lock 1 comprising a latch plate 1b and a latch arm 1a.
The latch plate may incorporate an integral spring, for example if made of spring steel.
Figure 12 is a top view of the latch plate and hinge tube assembly.
The dual mode latch plate MUST be in “ Cinching ” mode prior to child restraint installation.
Installation Manual 6 - Put the travel latch plate on the other side of the door.
The latch plate includes several detent notches, one of which corresponds with a Park position.
To use the dual mode latch plate in “ Cinching ” mode.
The latch plate 32 may be located to be movable inside the casing 1.
In a secured position, latch plate 65 is located within receiving chamber 79.
The latch plate 32 may be movably located inside the second conductive casing 13.
The hook end of the latch plate 44 defines a generally elongate recess 49.
As such, latch plate 40 secured to the second tube section 32 is now visible.
Thus, spring 44 biases each latch plate 41 towards the operative position thereof.
Thus the latch plate 12 is biased to seize a pin.
The upper edge of latch plate 66 should be approximately level with projection 40.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Latch
Show more
Slide the latch to the unlocked position
I remember the sound of the latch sliding
Latch at bottom of heater assembly should be in up position
