Examples of 'layer signal' in a sentence
Meaning of "layer signal"
A 'layer signal' typically refers to a form of communication that is indirect or subtle, often involving nonverbal cues or implications. This phrase is commonly used in situations where a message is conveyed implicitly rather than being stated explicitly
How to use "layer signal" in a sentence
Basic
Advanced
layer signal
The upper layer signal is then decoded.
This effectively produces an idealized upper layer signal.
The lower layer signal may even be an analog signal.
The first layer symbols are also used to construct an idealized first layer signal.
The ODUk signal is the server layer signal for client signals.
The upper layer symbols are also used to generate an idealized upper layer signal.
The higher layer signal includes any one of a first configuration and a second configuration.
High spectral efficiency improvement should employ a single lower layer signal with a varied code rate.
The higher layer signal can define the corresponding cross-subframe index for cross-subframe scheduling.
In contrast, pPDGFRB medial layer signal was low.
Transmitting a higher layer signal indicating the one selected UCI multiplexing method to the subscriber station ;.
In contrast, pPDGFRPB medial layer signal was low.
The ideal upper layer signal can be filtered through an FIR matched filter 518.
This leaves the lower-power second layer signal.
The apparatus produces a single layer signal that is also decodeable with a legacy receiver.
See also
In a default condition, the insertion of 0 represents that the client layer signal is normal.
In another embodiment, a new physical layer signal is introduced for the explicit signaling.
During non-active speech, gain is implicitly estimated from the base layer signal.
Method and apparatus for transporting a client layer signal over an optical transport network ( OTN ).
Receiving, from a base station, information for the offset value on a higher layer signal.
The maximum power increase of the upper layer signal is approximately 6.5 dB.
The upper layer signal is then mapped to the desired constellation and modulated by mapper / modulator 1310.
Layer 1 is the lowest lower and implements various physical layer signal processing functions.
Similarly, the lower layer signal is mapped and modulated by mapper modulator 1312.
This creates a power " room " in which a new lower layer signal may operate.
The decoded upper layer signal is then delivered to a display 414A.
The idealized upper level signal is subtracted from the demodulated upper layer signal 1020.
The processor 506 for extracting a lower layer signal can be implemented as a logic circuit.
However, a reduced symbol rate will also reduce the throughput for the lower layer signal 808B.
The PHY 230 performs physical layer signal processing functions.
The code rate is fixed at 6/7 for the lower layer signal.
The second layer signal is demodulated 410 and FEC decoded 408 according to its signal format.
No interference is shown with the lower layer signal bandwidth up to 5.2 MHz.
Here, H ' is delivered to a higher layer signal.
In such a situation, the UE 100 receives a higher layer signal from the first cell.
N ( 1 ) PUCCH is a value determined by using a higher layer signal.
Layer 1 ( L1 layer ) is the lowest layer and implements various physical layer signal processing functions.
N ( 1 ) PUCCH is a value set by a higher layer signal.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
