Examples of 'layer typically' in a sentence
Meaning of "layer typically"
layer typically: This phrase is used to describe a common characteristic or behavior of a specific layer or level within a context
How to use "layer typically" in a sentence
Basic
Advanced
layer typically
This layer typically provides a bacterial barrier.
Payload clients located above this layer typically does not see this traffic.
This layer typically has a thickness of around one micron.
The composition of the first absorbent layer typically includes the reaction product of,.
The first layer typically will be a film or a cellulosic nonwoven web.
Poromerics are made from a plastic coating ( usually a polyurethane ) on a fibrous base layer typically a polyester.
The intermediate layer typically comprises cysteine.
The layer typically comprises grains containing the triazine compound.
In other approaches, the organoclay used in the sealing layer typically comprises a plurality of particles.
This inner layer typically may be a foam made of plastic.
In a 1 % solution removal of the passivation layer typically takes around 30 seconds.
The second layer typically will be formed from a dispersion.
The average thickness of the dried dip coating layer typically is from 40 to 400 microns.
A protective layer typically overlays the graphic design.
As rollover anticlines develop during sedimentation, each layer typically shows thickening toward the controlling fault.
See also
The sealing layer typically exhibits a thickness of greater than several microns.
The average thickness of the dried dip-coating layer typically is from about 40 to about 400 microns.
The layer typically is formed from an aqueous solution of the cationic polymer.
The thickness of the deposited layer typically ranges from 5 nm to 30 nm.
This layer typically comprises five to eight quantum wells under compression stress.
This interlevel dielectric layer typically has a thickness of 800 nm.
A central layer typically has an even and relatively homogenous distribution of fibres through the layer.
The thickness of the boron ceramic or diamond layer typically ranges from 100 nanometers to 10 micrometers.
The buffer layer typically is made of an extruded plastic material such as polyvinyl chloride.
The other layer ( s ) may be any layer typically included in multilayer film structures.
The colored layer typically contains pigments or dyes or some combination of pigments and dyes.
The fibers of the fibrous layer typically will have a diameter of 5µm to 35µm.
The core layer typically has a lower fibre content than the surface layers.
The first tablet layer typically comprises at least one filler.
Such layer typically will withstand scribing with the point of a 4H pencil without breakthrough.
This first absorbent layer typically is the most absorbent material of the dressing.
The primer layer typically improves the adhesion of the coating layer that comprises the rapamycin.
The fluid storage layer typically comprises any usual absorbent gelling material.
The cling layer typically comprises the A layer while the release layer typically comprises the B layer.
The fibres in any given layer typically predominately extend along one direction.
This layer typically has a thickness of the order of 1 micron.
The metallized reflective layer typically consists of gold in CD-R and aluminum in CD-ROM.
This layer typically consists of alumina, base-promoted alumina, or silica gel.
As such, the barrier layer typically dominates the permeability of the film.
This layer typically specifies parameters like e.g. voltages, speed, and pin-out of cables.
The acid-soluble layer typically comprises an acid-soluble polymer.
The central layer typically contains fractional melt MI LDPE occasionally blended with HDPE.
The primary distribution layer typically underlies the topsheet and is in fluid communication therewith.
The skin layer typically comprises polyesters, polyamides or polyolefin.
The outer covering layer typically is formed of a durable material ( e.g., a textile ).
The outer layer typically is a thin glossy paperboard layer and / or a film layer.
The outer overcladding layer typically consists of doped or undoped, natural or synthetic, silica glass.
The core layer typically contains the active agent, optionally with one or more excipients.
The flexible backing layer typically serves to provide strength and dimensional stability to the sheet.
The tree layer typically is predominated by Douglas-fir with lesser amounts of western redcedar.
You'll also be interested in:
Examples of using Typically
Show more
The result is typically lower costs of capital
Typically that will be a conventional tape recorder
Preferential offenders typically have dozens of victims
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
