Examples of 'layer using' in a sentence
Meaning of "layer using"
layer using: Refers to adding a new component or element on top of something, typically in a technological or creative context
How to use "layer using" in a sentence
Basic
Advanced
layer using
Identifying the current layer using layer definitions.
These decorative layers are conjoined to the underlying intermediate layer using adhesives.
A layer using all four of the four toner printing cartridges may be printed.
Achieving a continuous metallic chromium layer using a paint is difficult.
Loosen the ice layer using plastic or wooden implements never use metal implements.
Bounds are established for the stiffness of an equivalent layer using a theoretical approach.
Cutting the cover layer using cutting means belonging to the mold ;.
Said material is applied to the core as a surface layer using using presses.
Each SU can lock to the physical layer using the synchronisation bursts as described above.
Silicon doping is performed during growth of the emissive layer using a silane flux.
Create new layer using this WMS.
The haemostat may be maintained in contact with the carrier layer using an adhesive.
This is applied in a very thin even layer using a process such as electrostatic deposition.
Conductive coating composition and method for manufacturing a conductive layer using same.
You can also fade the objects on a locked layer using the LAYLOCKFADECTL system variable.
Among these, one solution consists in encapsulating the stack comprising the organic layer using a cover.
You can play this CD layer using a conventional CD player.
Another adhesion promoting layer is applied over the ink layer using an anilox roll.
Fit the bottom layer using soap stone part 3.
The desired compound was then extracted from this aqueous layer using ethyl acetate.
Layer 1 is a physical layer using channel structures above the air interfaz.
This method has demonstrated the feasibility of a layer using this type of material.
It is attached to the foil layer using either a solvent or solvent-less adhesive lamination.
An immobilized enzyme layer was deposited on the electrode layer using a screen printing method.
To create a new layer using default settings, do one of the following:.
The organic layer was then separated from the aqueous layer using a separatory funnel.
Layer 2 can be a lubricity layer using OMCTS applied in a non-oxidizing atmosphere.
The base layer as formed was then adhered to the punched layer using heat lamination.
The formation of a water-repellent layer using this water repellent was performed as in the following.
A conductive layer is then printed over the insulating layer using the conductive ink.
A composition of a thermochromic layer using the glass composition of Table 3 is shown in Table 4.
The flexible hydrophobic layer is preferably applied over the lipid layer using similar techniques.
Here, the reproduction layer refers to a layer using burrs produced while molding a container by recycling.
Network assisted multicast may also be implemented at the Internet layer using IP multicast.
Create an inexpensive drain layer using clay rocks, or broken clay pots.
Selectively ablating portions of the slip film layer using a laser ;.
Photosensitive resin composition, photosensitive layer using the same and photosensitive resin printing original plate.
An adhesive layer is applied over the abrasion-resistant coating layer using an anilox roll.
The thickness of deposited GaN layer using this technique is typically up to 800 µm.
Forming a liquid channel pattern on the polyether amide layer using a soluble resin ;.
A method of constructing the base layer using chalk puddle was described in The Field 14 December 1907.
Additional layers can be cast on top of the initial layer using the same procedure.
Paint the molds of a thin layer using a brush, and let solidify.
Nanoparticles containing TiO2 are deposited onto the modified surface layer using a spray gun.
Neutralize the aqueous layer using 5 M sodium hydroxide.
The adhesive components may be coated on the non-adhesive self-supporting layer using various methods.
It is possible to produce the intermediate layer using the process described above.
Figure 11 illustrates an example of selectively depositing a discontinuous layer using OVJD.
Then, the gas sheets are laminated into a layer using the rollers or pressing machine.
Quality degraded by the presence of pre-echo in the enhancement layer using transform coding ;.
You'll also be interested in:
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
