Examples of 'layers are then' in a sentence
Meaning of "layers are then"
The phrase 'layers are then' usually suggests that after a certain process or action has taken place, additional layers or steps are added to further enhance or build upon the previous ones. It implies a sequential progression or a hierarchical structure
How to use "layers are then" in a sentence
Basic
Advanced
layers are then
Further layers are then stacked on top.
The adhesive precursor layers are then cured.
The layers are then rigidly attached by sintering.
The two polyurethane layers are then cured.
The two layers are then collectively fired.
The polyester terephthalate protective layers are then removed from the samples.
The layers are then assembled into a laminate.
No further adhesive layers are then required.
Two layers are then spread over the court.
Three-dimensional boundary layers are then considered.
The two layers are then allowed to cool.
In an embodiment, the bonded inner and middle layers are then cured.
The adhesive layers are then fully cured.
The layers are then fused together.
The subsequent dielectric - phosphor - dielectric layers are then usually deposited by sputtering or evaporation.
See also
The layers are then allowed to separate.
Once the barriers have been produced, the phosphor layers are then deposited by photolithography.
The two layers are then bonded together.
After an optional flash-off phase, both layers are then cured together.
All these layers are then held together by thermoforming.
The substrate and subsequently processed layers are then subjected to a de-ionized water rinse for 5 minutes.
The layers are then simply combined with one another.
The resulting cured silicone layers are then removed from the mould 10.
Other layers are then laminated to this initial structure.
The two coating layers are then cured simultaneously.
The layers are then preferably calendered to effect adhestion therebetween.
The desired coating layer or layers are then applied over the adhesion promoter.
The layers are then carved away to reveal the varying colors.
The resulting layers are then collectively fired.
The layers are then fused together to create the final object.
Epitaxial buffer layers are then deposited on the substrate.
These layers are then capable of storing charges for the production of memories.
The individual colour layers are then mechanically overlaid in register.
These layers are then covered with reinforcements and finally with rubber.
Supported catalyst layers are then on both sides of the membrane.
Both layers are then cooled down to form the dual hardness armor.
The honeycomb layers are then cut out of the block.
These layers are then bonded under high pressure and temperature conditions.
The printed and dried layers are then annealed in sulfur atmosphere.
Several layers are then superposed and needled to form a fibrous preform.
The metal and passivation layers are then deposited on top of the filling material.
Preparation layers are then formed to perform a localized growth of a mechanically reinforcing material.
The first and third polymer layers are then coupled to the second polymer layer.
The layers are then pressed into a piece and fired to form the finished article.
The aquaeous layers are then extracted with EtOAc.
The layers are then separated, retaining the upper layer of the three observed.
The two other layers are then made in the same way.
The layers are then separated with a hydrophobic frit, and the organic concentrated in vacuo.
The joined alloy layers are then cooled to form a composite ingot.
The layers are then laminated together, using heat and / or pressure.
You'll also be interested in:
Examples of using Layers
Show more
Layers ribs and onion in slow cooker
Fascia and tissue layers are easy to penetrate
Layers of snow have fallen in the mountains
