Examples of 'leds indicate' in a sentence
Meaning of "leds indicate"
LEDs indicate refers to the light-emitting diodes that are used to give visual feedback or display information. They are commonly found in electronic devices and can be used to indicate various states or conditions, such as power on/off, battery level, or error status
How to use "leds indicate" in a sentence
Basic
Advanced
leds indicate
The detector LEDs indicate the status.
The following table describes what the LEDs indicate.
The white LEDs indicate the front.
It indicates the connected device and charges automatically until all LEDs indicate charging has finished.
The green LEDs indicate blower speed.
It should be charged whenever the Blue Status LEDs indicate the unit is low.
The various LEDs indicate the following.
LEDs indicate active or muted channel conditions.
These status LEDs indicate the arming level.
LEDs indicate the signal status of each channel.
The corresponding LEDs indicate when a light is selected.
LEDs indicate when the equipment is switched on or not.
Their corresponding LEDs indicate which preset is active.
The LEDs indicate the progress of charging by lighting up continuously or flashing.
The corresponding LEDs indicate the current setting.
LEDs indicate the connection status and the charge level.
The green control LEDs indicate the activated zones.
LEDs indicate the selected power level.
Make sure that the LEDs indicate the correct conditions.
LEDs indicate the status of Power status and Ethernet connection.
Check that the indicator LEDs indicate the correct conditions.
The LEDs indicate wireless microphone signal input.
Illumination and flashing of the LEDs indicate the charging status.
Red LEDs indicate iron target nail.
Check that the camera 's status LEDs indicate the correct.
Those leds indicate the selected source.
When power is applied, check that the indicator LEDs indicate the correct conditions.
Control LEDs indicate the operating status.
After the operating voltage is switched on, the extinguished red LEDs indicate error-free operation.
Diagnostic LEDs indicate system status.
At level 2 the OK Led flashes quickly while the INPUT Leds indicate the selected parameter.
Diagnostic LEDs indicate axis movement.
The LEDs indicate the currently active pattern.
When the Access Point is connected to power, LEDs indicate activity as follows.
Two red LEDs indicate a high level of charge.
Indicates a weak signal, 3 LEDs indicate a strong signal.
These LEDs indicate which parameters are actually being edited.
Continuous lightning of these leds indicate that the signal is being massively compressed.
LEDs indicate the operational status ; flashing patterns signal faults and facilitate diagnosis.
Individual external diagnostic LEDs indicate the health and status of key components.
The LEDs indicate increasingly colder settings as you continue to the right.
The main unit 's LEDs indicate the following.
The LEDs indicate if the unit is connected and within the scope.
The charge status LEDs indicate the voltage state,.
Two LEDs indicate charger status, charging progress and battery health.
Speaker LED These dual-color LEDs indicate the status of each Speaker Out port.
Two LEDs indicate the operating condition of the Inverter.
The SYNC1 and SYNC2 LEDs indicate the current channel.
The LEDs indicate the operating state of the product.
Green/Yellow/ Red LEDs indicate record level.
You'll also be interested in:
Examples of using Leds
Show more
The LEDs then turn off automatically
Then the two LEDs flash red
Read LEDs to determine cable wiring status
Examples of using Indicate
Show more
Your tone seemed to indicate a certain flexibility
Indicate that this often happens in nature
Settings in bold indicate the recommended method
