Examples of 'lens barrel' in a sentence
Meaning of "lens barrel"
Lens barrel: The tubular part of a camera lens that houses the optical elements. It protects the lens and can have features like zoom or focus rings. Used in photography and videography
How to use "lens barrel" in a sentence
Basic
Advanced
lens barrel
To protect the lens barrel against scratches.
Unscrew the protective cap of the lens barrel.
Corrects lens barrel or pincushion distortion.
Camera and confirm that the lens barrel is recessed.
The lens barrel is laterally separated from the gasket by the axial extension.
The elements are typically assembled in the lens barrel in a clean room environment.
The hood is so well designed it looks like part of the lens barrel.
A zoom lock switch prevents the lens barrel from accidentally extending when not in use.
Nearly all other controls were incorporated into the lens barrel.
As a result, the lens barrel is protected by the axial extension from impact.
A photographic device that includes a main body and a retractable lens barrel is provided.
A over the lens barrel and then secure it by carefully tightening the 3 plastic screws s.
Aperture stops are clearly marked in white on the lens barrel for manual exposure control.
Lens barrel extension / retraction commands could fit into other places as well, of course.
In some embodiments, this may be accomplished by moving a lens barrel.
See also
An AF / MF switch is located on the lens barrel for tactile control over this setting.
L-lenses can be identified by the distinctive red ring on the lens barrel.
Typical lens barrel extension distances can be 0.5 mm or even greater.
Power off, Close the lens barrier slightly until it almost touches the lens barrel.
With the internal focusing ( IF ) system, the lens barrel length does not change during focusing.
Attaching Filters ≥ Attach or detach the filter when the lens barrel is.
In step 358, the lens barrel is kept within the axial extension.
The zoom reset switch 11 is secured to the front lens barrel 1 by a screw vía a board.
At its bottom end, the lens barrel 86 includes a reduced diameter portion 93 as shown.
FIG . 2 is a sectional view of the configuration of the lens barrel portion of Embodiment 1 ;.
FIGS . 2A-2B illustrate a lens barrel for use with the representative optical assembly of FIG . 1.
The optical axis of the eye lens 74 matches the lens barrel axis A.
Within this hole 43 is mounted a lens barrel 35 within which is secured the objective lens 25.
Select the required magnification ( 1x or 2x ) by turning the lens barrel.
The objective lens assembly 96 includes an objective lens 116 in a lens barrel.
Into this hole 43 is guided and introduced an upper end of the lens barrel 35.
The disc shaped bimetal is arranged inside a case 56 fixed to the lens barrel 12.
You'll also be interested in:
Examples of using Barrel
Show more
The barrel can overheat and fracture
Do not remove the barrel rotation knob
The barrel was within two to three inches
Examples of using Lens
Show more
Lens changing instructions for lazer eyewear
The surface of the lens is very delicate
Keep lens filters out of reach of children
