Examples of 'lever' in a sentence
Meaning of "lever"
lever (noun): A simple machine consisting of a bar that pivots on a fixed support, used to transmit a force. It can also refer to a means to accomplish something
Show more definitions
- A rigid piece which is capable of turning about one point, or axis (the fulcrum), and in which are two or more other points where forces are applied; — used for transmitting and modifying force and motion.
- Specifically, a bar of metal, wood or other rigid substance, used to exert a pressure, or sustain a weight, at one point of its length, by receiving a force or power at a second, and turning at a third on a fixed point called a fulcrum. It is usually named as the first of the six mechanical powers, and is of three kinds, according as either the fulcrum F, the weight W, or the power P, respectively, is situated between the other two, as in the figures.
- A small such piece to trigger or control a mechanical device (like a button).
- A bar, as a capstan bar, applied to a rotatory piece to turn it.
How to use "lever" in a sentence
Basic
Advanced
lever
Do not lift lever during brewing cycles.
Lever can be adjusted to a different lever angle by.
Open the lock lever to unlock footplate.
Lever in the outer position transmission disengaged.
Pull the pusher lever to the rear.
Close lever on side of toilet after use.
Raise attachment lift lever to highest position.
Brake lever length of reference test trailer.
Check that throttle lever is properly set.
Push lever down to disengage parking brake.
Release the switch lever to turn it off.
Lift lever is located on left side of fender.
Move the throttle lever up to full throttle.
A lever for disengaging the variable transmission.
Excessive movement of lever indicating incorrect adjustment.
See also
Lever positions are indicated on the relevant plate.
Excessive wear at lever pivot or in ratchet mechanism.
Lever on the axle leg steering lever.
Grasp black lever on one drain valve.
Squeeze the thumb control lever further.
Tighten lever at the depth setting desired.
Securely lock the bevel lock lever.
Push the lever backward to decrease firmness.
Step on handle release lever to lower handle.
Pull this lever to start playback of a record.
Put hydraulic drive lever into neutral.
The lever in front of him controls movement.
Turn decompression lever until stop is reached.
Loosen the screw securing the lever.
Pull this lever to stop playback of a record.
Immediately set the choke lever to position.
Slide choke lever out to closed position.
The position of the throttle lever can be.
Engage brake lever to drive the chair.
Press down right drawer release lever.
Pull the lever over the pin.
Close blade clamp release lever down.
Release the lever on its proper position.
Lower the bevel adjustment lever to retighten.
Push the lever upwards to the stop.
Tine movement is achieved by moving shift lever to.
Flip up locking lever to its locked position.
The jaws of a vise are moved by a screw or a lever.
Move the shift lever to a slower speed.
Grip handle firmly before squeezing lever.
Quick release lever for pressure foot.
Seat height infinitely adjustable by pulling up lever.
Rotate actuator lever to depress switch plunger.
Backrest height adjustable by folding out lever.
Lower buttonhole lever when sewing buttonholes.
