Examples of 'lift arm' in a sentence
Meaning of "lift arm"
The phrase 'lift arm' is commonly used to describe the action of raising or elevating one's arm. It can be used in a literal sense, such as when someone physically raises their arm, or in a figurative sense to convey gestures of greeting, pointing, or signaling. It can also refer to the mechanical or hydraulic components used to raise or lower objects or equipment
How to use "lift arm" in a sentence
Basic
Advanced
lift arm
Repeat procedure for lift arm on opposite side.
Lift arm suspension system for a power machine.
Resistance is due to dirt on the vertical lift arm.
Reinforced lift arm and optimised buckets boost productivity.
Repeat procedure for right wing lift arm.
Lift arm over your head only if approved by your doctor.
Remove reel from lift arm.
The free end of the lift arm is attached to the articulated grabber.
Place each cutting unit in front of its respective lift arm.
Activate the foot pump until the lift arm is raised to maximum height.
The implement coupler is configured to latch an implement to the lift arm assembly.
Turn hand over then lift arm in front of your body to shoulder level.
Interface plate for mounting a light duty attachment to a lift arm assembly.
Each furnace requires one lift arm if the arm is removable from a roof.
Remove the pin and slide the deck pin out of the deck lift arm.
See also
This type of lift arm assembly can include a telescoping lift arm or not.
Pull the deck support pin outward to release the deck from the deck lift arm.
Lower the arm by using the lift arm and press the arm down.
The parallel lift arm ensures effective handling with less tilting variation of the attachment.
Pull the deck release handle and carefully release the deck from the deck lift arm.
Remove pin from left front lift arm and slowly lower front deck.
Operator must have a firm grip on the drill before raising or lowering the Lift Arm.
A selectively activated lift arm suspension system is operably coupled to the lift arm assembly.
Installation Instruction Installation of the lift arm.
The reach arm and the lift arm both have a fixed end and a free end.
In most instances, the implement carrier is pivotally attached to the lift arm.
Wheel Pads must be equal distance from the Lift Arm to maintain proper balance.
During operation, the lift arm wheels make contact with the platform support of the base.
Depending on the air suspension type, the lift arm position can be adjusted.
Thus, two or more roofs procured for one specific furnace require only one lift arm.
Stress-optimized lift arm design that minimizes arm deflection.
Place the transport bar (C) between the cylinder pivot pin and the lift arm as shown.
Lift arm manually until it is at an angle of 17.
The latter extends substantially vertically whereas the lift arm ( 22 ) is substantially horizontal.
Position the lift arm ( 6 ) over the hanger bracket or cross member.
Implement coupler 38 allows for the quick connection of implements or attachments to lift arm assembly 34.
For example, lift arm assembly 110 of the power machine can support a spade or other implement.
Replace spring if broken . Grease pivot shaft, oil all lift arm linkages.
Details of the articulated lift arm are best seen in Figures 4 and 5.
If lift arm raised, jack is ready for use . If not, repeat this procedure.
Stop bracket ( U ) must be up against the lift arm.
Lift arm 17 is also coupled to a working tool that, in this preferred embodiment, is a bucket 28.
Liebherr I 556 wheel loader with industrial lift arm handling biomass.
Lift arm 17 is also coupled to a working tool which, in this preferred embodiment, is a bucket 28.
Hook the chain I and lifting spring F in the attachment 's lift arm fig 6.
The lift arm 17 is also coupled to a working tool that, in the illustration, is a bucket 28.
Other functional components include the lift arm structure 122.
A single lift arm 18 is shown in FIG.
Further, the pick-up roller shaft 6 is abutted against one end of the lift arm lever 10.
Raise lift arm (Z) manually until it is at an angle of 30 above horizontal.
