Examples of 'lights red' in a sentence
Meaning of "lights red"
Lights red: This phrase is often used in traffic or safety contexts to describe a signal or indication for vehicles or individuals to stop or proceed with caution
How to use "lights red" in a sentence
Basic
Advanced
lights red
Lights red continuously while charging is in progress.
Engine oil pressure warning lights red.
Lights red when the receiver is powered on.
The button lights red as an alert.
Lights red when overload protection circuits are activating.
The indicator lights red and charging starts.
Lights red in special modes and in case of errors.
The indicator lights red and charging begins.
Lights red if no signal is received or the squelch is active.
I want all traffic lights red.
Lights red while transmitting and green while receiving.
If there is a connection failure the button lights red.
Lights red while transmitting.
The charger led lights red.
Lights red when no reference signal is available or when an error occurs.
See also
We can turn traffic lights red.
The indicator lights red when the device is in standby mode.
When the sound is muted the button lights red.
The button lights red to indicate a failed connection or other errors.
So drivers do not have to get all the lights red.
The lights red.
The charge indicator on the power supply unit lights red.
The light ring lights red regardless of the mode set.
Cleaning cartridge does not contain enough cleaning fluid display lights red.
And the master radio lights red and deputy one lights.
Cleaning cartridge contains not enough cleaning fluid display lights red.
The standby indicator lights red when the unit is in the standby mode.
Lights up green when reaching the flash readiness lights red in standby.
The power indicator lights red and the power is set to the standby.
On the parent unit the power indicator lights red and short.
Lights red in Standby mode or if a fault develops in the circuit.
The power tool does not start and the service indicator lights red.
The LED lights red when the battery must be charged.
The heating symbol appears on the display and the corresponding indicator lamp lights red.
The integrated LED lights red during the charging process.
The batteries are still serviceable when the POWER indicator lights red.
Meanwhile LED lights red and goes out when charging is complete.
In case of overload the LED above the selector switch lights red.
The LED lights red when the input signal is overloaded.
The power tool does not start and the LED lights red.
The adjacent LED lights red and the display indicates.
The battery is fully charged before first use charging LED indicator lights red.
The TC indicator lights red when correct timecode is being input and recognized properly.
During charging the LED lights red.
If the power LED lights red the batteries are weak and should be replaced.
Right LED indicator lights red.
The LED indicator lights red while transmitting and green while receiving a signal.
If the RMS limiter is active the LED lights red.
The INFO indicator lights red when an error or warning has occurred with the unit.
During recording, the indicator lights red.
You'll also be interested in:
Examples of using Red
Show more
Beneath the red scarf and a chapeaux
Red stars indicate fields that are mandatory
Visibility of red light from the front
Examples of using Lights
Show more
Lights heralding modern times in the workshops
Shut off the lights when you are done
Lights up when the sleep timer is activated
