Examples of 'line head' in a sentence
Meaning of "line head"
This phrase is unclear and does not have a specific meaning or context in English. It seems to be a combination of two separate words ('line' and 'head') without a clear connection or intended meaning
How to use "line head" in a sentence
Basic
Advanced
line head
Keep line head below waist level.
To be used with the cutting line head.
Tighten the line head clockwise.
The line head supplied requires manual adjustment.
Cutting work line head usage.
Installing cutting line in pro cut ii line head.
Install new line head on unit.
Do not fit metal wire in the line head.
Open the line head by pushing in both tabs.
Remove currently installed line head.
Inspect the line head assembly for cracks or dam.
If grass becomes wrapped around line head shaft.
Remove the line head release the snap ring.
Remove the spool from the line head.
Only one cutting line head can be used on this machine.
See also
Installing pro cut ii line head.
Install the line head on the drive shaft until fully.
Choose the guard suitable for a line head.
Inspect line head to make sure its is clean and free of obstructions.
To advance the cutting line reel easy line head.
Both of these are done with the line head tilted at a steep angle.
Avoid contact when installing or removing the line head.
Do not knock obstacles with the line head to avoid cutting lines.
Replace the spool in the bottom part of the line head.
Fit the line head assembly to the gear shaft over the holders.
Clean all debris from inside the line head assembly.
Thread line head onto output shaft by turning it anticlockwise until head is tight against.
Remove the spool from the bottom part of the line head.
Hold both handles firmly until the line head comes to a complete stop.
The line head continues to spin for a while even after the power switch has.
The plastic shield is for use with the nylon line head only.
Press both tabs on the line head cover and remove cover by pulling upward.
The spring should remain in the hole in the center of the line head base.
Guide the bottom part of the line head into the top of the line head.
Remove old trimmer head adapters from power output shaft before installing new line head.
Remove the line head bottom and the line spool from the line head top.
Do not use the machine for sweeping, tilting the cutting line head.
Thread and tighten the Line head clockwise onto the rotary shaft.
To prevent injury, do not use the YardStick with damaged line head assembly.
Thread line head onto threaded mounting stud, turning clockwise.
Plastic grass / weed blade may be used wherever the nylon line head is used.
Thread line head onto power output shaft, turning clockwise.
In this respect, the description has been made using a full line head as the head.
Remove the Line head by turning it manually anti-clockwise from the rotary shaft.
Guide both wedged-in line ends through both opposite eyelets in the line head top.
For optimum results, regularly rotate the line head down and bump feed to advance string.
Plastic / Nylon Grass / Weed Blades may be used where ever the nylon line head is used.
Remove the cutting line head ( 1 ) unscrewing it in a clockwise direction.
Plastic shield - For nylon line head only.
Fit the cutting line head ( 1 ) screwing it up in an anticlockwise direction.
You'll also be interested in:
Examples of using Line
Show more
One in a long line of successful cop marriages
Select the data to display on that line
Those withdrawals are in line with international law
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
