Examples of 'linear dimensions' in a sentence
Meaning of "linear dimensions"
Refers to the measurements or distances between two or more points in a straight line. It is commonly used in mathematics, engineering, and other scientific fields to describe the length, width, and height of a geometric figure or object
How to use "linear dimensions" in a sentence
Basic
Advanced
linear dimensions
All linear dimensions are shown in millimetres.
Device for checking linear dimensions of parts.
Linear dimensions are in millimeters and angular dimensions are in degrees.
Jog lines can be added to linear dimensions.
The smallest linear dimensions are closest to the profile.
Controls the display of the jog for linear dimensions.
Add additional linear dimensions to the sketch as shown.
The casting was surveyed to establish the overall linear dimensions.
All linear dimensions specified herein are in mm.
Adjusts the spacing between linear dimensions or angular dimensions.
The volume of a groove will be determined by its linear dimensions.
Time during which the linear dimensions of space double.
Linear dimensions in millimeters.
Creates rotated linear dimensions.
Linear dimensions in millimetres.
See also
Creates horizontal linear dimensions.
Linear dimensions of sheets.
Creates vertical linear dimensions.
Linear dimensions types.
Tolerance on linear dimensions.
A micrometer is a sensitive tool for making accurate measurements of linear dimensions.
Tolerances on linear dimensions.
The linear dimensions can also be entered or overwritten using the keypad.
Creates a linear dimensions.
Adjusts the oblique angle of the extension lines for linear dimensions.
The change of the linear dimensions of the sample versus increase of temperature was measured.
Determination of linear dimensions.
Linear dimensions are created with extension lines perpendicular to the direction of the dimension line.
It also automatically calculates and displays linear dimensions as you draw.
Linear dimensions in millimetres Tolerances on dimensions without specific tolerance.
Each level of mipmap texture has half the linear dimensions of the previous one.
Linear dimensions in millimeters Tolerances on dimensions without specific tolerance.
The sensibility of the system increases with the linear dimensions of the optical cavity.
Decrease in linear dimensions of boards or panels but not thickness ;.
This issue becomes even more significant for joined discs of bigger linear dimensions diameters.
Following this conversion, the linear dimensions of the ship remained the same.
These linear dimensions can also be stacked, or they can be created end to end.
Dialog box section Linear dimensions.
You can create linear dimensions with horizontal, vertical, and aligned dimension lines.
Angles as before, but all major linear dimensions are.
Two examples are linear dimensions and feature control frames using a datum reference ( both shown above ).
Creates a series of baseline dimensions, in which linear dimensions share a common extension line.
The linear dimensions are expressed conventionally as a percentage of the outside diameter De of impeller 1.
Pipes made of polypropylene have one feature, strong heat affects their linear dimensions.
Linear dimensions of the scene P to be filmedw3 m.
Does not control forms in which all linear dimensions are 75 mm or less.
NOTE 1 All the linear dimensions and tolerances are expressed in millimetres.
The O-ring is measured by ' volume ' and then quality controlled using linear dimensions.
Linear dimensions can be horizontal, vertical, or aligned.
Dimension lines: linear dimensions.
You'll also be interested in:
Examples of using Dimensions
Show more
Power pack cutout dimensions model width d e
Dimensions will bleed into each other
Stabilization of the dimensions of the loading units
Examples of using Linear
Show more
Rotary tables linear system handling software
Linear guideways and cross roller guides
Glass scales as linear length measuring system
