Examples of 'lint screen' in a sentence
Meaning of "lint screen"
lint screen: A device or filter used to trap lint and debris in appliances such as dryers or washing machines. It helps prevent lint buildup and improves the efficiency and safety of the appliance
How to use "lint screen" in a sentence
Basic
Advanced
lint screen
Clean lint screen before each use.
Do not operate dryer without lint screen in place.
Pull the lint screen toward you.
Do not remove the lint screen.
Clean lint screen before each load.
Replace cover on lint screen body.
The lint screen is located in the dryer.
Make sure the lint screen is clean.
The lint screen is located on top of the dryer.
Check for a clogged lint screen.
Clean lint screen after each cycle.
Do not rinse or wash the lint screen to remove lint.
Clean lint screen after every load.
Fabric softener sheets are blocking the lint screen cover.
Be sure the lint screen is not torn.
See also
Lint screen should be cleaned before each load.
Thoroughly rinse the lint screen with hot water.
Lint screen clogged with lint.
Always clean the lint screen before every cycle.
Lint screen or lint screen housing is clogged with lint.
Begin with an empty dryer and a clean lint screen.
Pull the lint screen straight out.
He was sticking to the lint screen.
Pull the lint screen out of its holder.
Do not use this dryer without the lint screen in place.
Slide the lint screen back into place.
Do not operate the dryer without the lint screen in place.
Clean lint screen and lint compartment daily.
Push down on the frame front to secure over lint screen.
Check the lint screen before every load.
Dry smaller loads so lint can be carried to the lint screen.
Check that lint screen is clean and in place.
Lightly brush any lint that may be left on the lint screen.
Check lint screen for debris and other obstructions.
No lint on lint screen.
The lint screen is located in the door opening of the dryer.
Open the door and pull the lint screen straight out.
Clean the lint screen before starting each load.
The dryer automatically detects reduced airflow caused by a full lint screen.
Clean the lint screen before and after each load.
The display also monitors the vent and lint screen status.
Remove tape from lint screen located on inside back wall of dryer.
Some fabric softeners can build up on the lint screen over time.
Thoroughly dry lint screen body and cover with a clean towel.
Push down on front edge of dryer rack to secure over the lint screen.
The lint screen is located inside the dryer in the front door.
Place the front bar under the lip of the lint screen opening.
Squeeze body of lint screen lightly while pulling off the cover.
Locate the two metal sensor strips on the face of the lint screen housing.
Completely dry the lint screen before reinstalling and using the dryer.
