Examples of 'liquid pipe' in a sentence
Meaning of "liquid pipe"
This phrase is used to describe a type of pipe or conduit that is designed to transport liquids, such as water, oil, or chemicals. It indicates that the particular pipe is specifically intended for the flow or transfer of fluid substances. The phrase is commonly used in engineering, plumbing, or industrial contexts to differentiate from other types of pipes that deal with gases or other materials
How to use "liquid pipe" in a sentence
Basic
Advanced
liquid pipe
Fill from the liquid pipe in liquid form.
Liquid pipe temperature sensor of slave outdoor unit is open or short.
Charge the refrigerant to the liquid pipe in its liquid state.
The liquid pipe connects the receiver to the expansion valve.
Make sure to charge the refrigerant in liquid state to the liquid pipe.
And the liquid pipe insulation.
The calculation method of additional refrigerant charging amount on the basis of liquid pipe.
The gas pipe and the liquid pipe are additionally provided with stopcocks.
High pressure gas pipe Liquid pipe.
The liquid pipe temperature and indoor heat exchanger temperature are detected at the time of.
Additional refrigerant amount when the liquid pipe of the larger diameter is used.
Standard liquid pipe size Connected piping length is between.
Fully close the stop valve on the liquid pipe side of the outdoor unit.
Size up liquid pipe size Connected piping length is between.
Inserting substantially axially the windscreen washer liquid pipe into the housing of the cap.
See also
Make a flare for the liquid pipe and gas pipe and apply refrigerating machine oil.
Connecting pipe size of indoor unit Indoor unit capacity type Gas pipe Liquid pipe.
Do NOT use liquid pipe compounds for fitting connections.
Finally, seal with liquid refrigerant from the liquid pipe.
Liquid pipe temperature sensor of Master outdoor unit is open or short.
Attach the charge nut 5 to the liquid pipe side joint portion.
Liquid pipe h Drain hose i Long sealing j Insulation piece.
To determine the complete recharge amount (kg) in case of standard liquid pipe size.
Liquid pipe terminating in a supply device for any device, especially an engine ;.
The reference number 7a represent a liquid pipe and the reference number 7b represent a gas pipe.
The liquid pipe 40 is a refrigerant pipe through which mainly the refrigerant in a liquid state flows.
In case of standard liquid pipe size: Length.
J8 Liquid pipe outdoor unit thermistor failure.
Systems with sized-up liquid pipe.
G Indoor unit liquid pipe temperature indicator See note 4.
Precautions when adding R410AFill from the liquid pipe in liquid form.
Liquid pipe connection b Gas pipe connection c Heat exchanger 8 Technical data.
This portion of the liquid pipe extends, for example, to one meter.
The indoor pressure-reducing mechanism 7 is provided in the indoor liquid pipe 8.
Interconnection cable d Liquid pipe e Liquid pipe insulation f Finishing tape 2 Install the service cover.
The gas pipe 7 has the same length as the liquid pipe 5.
Connect the liquid pipe ( a ) to the liquid stop valve.
Generally, the gas pipe 7 is greater in pipe diameter than the liquid pipe 5.
An indoor unit connected side in the liquid pipe 16 is branched to four pipes.
This avoids excessive decrease in pressure of the refrigerant flowing in the liquid pipe ( 15 ).
A pipeline 20 is a waste liquid pipe while the arrow 21 indicates the dusts separated as a solid.
The liquefied high-pressure refrigerant liquid flows into the liquid pipe 9.
Generally, a pipe diameter of the liquid pipe 7a is smaller than that of the gas pipe 7b.
The liquid media is driven by pressure and it flows from condenser 8 through liquid pipe 16.
Attach the charge nut 5 to the liquid pipe side joint portion, and check for.
The drier removes moisture contained in the refrigerant flowing into the outdoor liquid pipe 210.
Real length of liquid pipe × + Additional refrigerant charge amount per liquid pipe 1m Table 1.
The end of the gas pipe is in a position higher than the heat-exchanger-side liquid pipe 32.
In a step S26, a target liquid pipe temperature DELSET is calculated.
The condensed liquid refrigerant flows out into the liquid pipe ( II ).
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Liquid
Show more
If liquid had been spilled into the product
Visual and electric liquid level monitoring
Liquid or sundries are forbidden to enter the charger
