Examples of 'load change' in a sentence
Meaning of "load change"
load change - Refers to the variation or adjustment in the amount of weight or stress placed on a system, structure, or equipment. This phrase is commonly used in engineering, mechanics, or technology sectors when discussing the impact of changing loads on a particular system
How to use "load change" in a sentence
Basic
Advanced
load change
Before and after the imposed load change.
Reduction of load change loss in the partial load range.
Method and arrangement for adaptive load change compensation.
The bit line load change tends to zero the output of amplifier ADj.
The slip compensation increases or decreases the output frequency as a response to a load change.
Stress fractures due to the load change following surgery.
If no load change is sensed, the power supply shuts off.
Several spanwise locations may be necessary depending on the amount of load change to counteract.
A case where a requested load change is used will be described as an example.
Therefore, the manager can accommodate a frequency fluctuation or a requested load change in a flexible manner.
The first term determines the load change of bearers requesting more capacity.
The load change compensation does not need to be active at all time-instants.
The second term determines the load change due to inactive users becoming active.
A corresponding output of a machine strain sensor representing the particular load change is shown in Fig . 9.
Response to a load change with a non optimized PID algorythm.
See also
For a no load to full load change Voltage Programming.
The air load change takes place in the two-stroke section of the engine.
Calculation of load change AF is described next.
For example, a load change of a boiler, which is a source of flue gas, is generally abrupt.
Only the amplitude of the load change is relevant, not the absolute value.
Handling of a cell load change due to an uplink beam direction change of a CLBF UE.
What is more, there are no load change reactions like in manual transmissions.
However, not so large load change occurs at the side face portions.
Then continue driving, as the load change can release the differential locks.
FIG . 5 is a typical load change zone in an electrolyzer.
The value of battery load change hysteresis may be apprehended from Fig . 9.
