Examples of 'load cycles' in a sentence
Meaning of "load cycles"
load cycles: In the context of technology or mechanics, 'load cycles' refer to the number of times a device, component, or system is subjected to loading and unloading. It is often used in discussions related to equipment durability or performance
How to use "load cycles" in a sentence
Basic
Advanced
load cycles
These load cycles may be determined from.
Total number of load cycles.
A million load cycles even in harsh environments.
They give excellent performance and many load cycles.
The quantity of load cycles is registered.
Changes in payload are likely to cause significant fatigue load cycles.
Built to deliver shorter load cycles through full load performance.
Predict component fatigue failures by examining repeated or random load cycles.
A large number of load cycles for determining the fatigue strength.
For instance the chain may be subjected to a number of load cycles.
The number of load cycles is counted by an electrical counter and displayed digitally.
The correlation between load amplitude and load cycles is not linear.
A reduction in the load cycles logically increases the service life of the crane structure.
Each mark on the graph represents a rupture after a particular number of load cycles.
Extremely high operating speeds cause a high number of load cycles and create severe operating conditions.
See also
After a cold start, let the engine warm up with a few load cycles.
Three Hertzian contact load cycles are thus performed on the central specimen at each turn.
AC networks are subjected to daily and seasonal load cycles.
The number of load cycles during the lifespan of the electric generator can exceed 109.
Use the DriveSize PC tool if the default load cycles are not applicable.
Figure 2 shows graphs of load against rotation obtained during the execution of the load cycles.
Expensive idling as well as load / no load cycles are thus eliminated.
Charging the Proceq DY-2 A fully charged battery is sufficient for approximately 80 complete load cycles.
Figure 6, Crack pattern after load cycles of up lo 86 atm peak load on the Fried.
This component has been tested according to ISO 10328 standard to two million load cycles.
For each torque interval, the number of load cycles Anij are calculated, block 11.
Each test consisted of five sinusoidal load cycles at 0.1 Hz.
You'll also be interested in:
Examples of using Cycles
Show more
Cycles through the available aspect ratios
D number of operating cycles required for regeneration
Wash cycles are adjusted based on what is sensed
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
