Examples of 'load size' in a sentence
Meaning of "load size"
Load size refers to the amount of material or data that can be accommodated or handled by a particular system or device. It determines the capacity or capability of the system to process or store information. For example, in computing, load size can indicate the memory capacity or processing power of a computer
How to use "load size" in a sentence
Basic
Advanced
load size
Initial file load size subsequent max.
Use less for a smaller load size.
Select load size to match clothes load.
Use less with a smaller load size.
Load size exceeds washer capacity.
Polite file load size max.
Select load size and other wash options.
Water level setting load size.
Adjust the load size accordingly.
Be sure water level is acceptable for load size.
Check for proper load size and distribution.
Determine the selected setting based on clothes load size.
Adjust load size based on items size and materials.
Try reducing your load size.
Adjust load size based on item size and material.
See also
Select a cold water rinse and appropriate load size.
Washer senses load size and adds correct amount of water.
Reduce detergent amount for that specific load size.
Make sure load size selected matches clothes load size.
The washer will automatically detect the load size.
Make sure load size selector matches clothes load size.
The light will indicate the load size selected.
Select the load size setting most suitable for your load.
The optimal load size.
Increase load size if washing small load containing heavy and light items.
This is shown to be solely a function of the load size ratio.
Pay attention to the load size when using this option.
Time will vary depending on load type and load size.
Boot load size.
The water level should be correct for the load size.
It can be used on any load size but is more effective on smaller loads.
The water level is just right for every wash load size.
For best results determine load size with dry items only.
The wash time is determined by the selected cycle and sensed load size.
Number of garments or load size not properly selected at the beginning of the cycle.
Perform service calibration to calibrate water level and load size detection.
Choose a load size that allows the load to move freely for best fabric care.
Reduce the wash time when using a small load size setting.
This washer senses the load size and composition through a series of fills and wash motion.
The estimated time may change once the load size has been measured.
The load size used in the IMT remains a point of controversy in the literature.
Wash full loads or adjust the water level to fit the load size.
This feature automatically determines the load size and the amount of water needed.
The second stage adds the correct amount of water based on the load size.
This additional time will depend on the load size and the hot water inlet temperature.
Use this option to adjust the amount of water used with your load size.
Turn the Load Size knob to select a water level appropriate for the load size.
The bulk of the clothes rather than the weight will determine load size.
Increase load size if washing small load containing heavy Not agitating and light items.
Always measure detergent and follow detergent directions based on load size and soil level.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Load
Show more
You can load up to five discs at once
Suppose you walk by with a load of cement
Lower the load to the bottom point
