Examples of 'load weight' in a sentence
Meaning of "load weight"
load weight: To bear or carry a heavy burden or responsibility, either physically or metaphorically
How to use "load weight" in a sentence
Basic
Advanced
load weight
Load weight gross weight of the load.
Each pod compartment has a maximum load weight.
Load weight for a long time.
You can keep doing this up to the maximum load weight.
The load weight is supported by suspension cylinders of the vehicle.
Washing machine with improved sensor for load weight.
Do not support the load weight of the whirlpool by the rim.
Load weight on car must not exceed the load limit stencilled on the car.
The same is done for the load weight and load angle.
The maximum load weight that is permitted to be loaded on the vehicle.
Another important aspect that affects the vehicle handling is the proper load weight distribution.
The ratio of a specified load weight to the total weight of the aircraft.
Excessive cylinder ram loading Reduce load weight.
Be aware of the towing load weight diff erences when towing at high altitudes.
We have chosen Winterhoff jockey wheel with load weight.
See also
Means for transferring the load weight on the at least two wheeled modules.
The load weight signal can be advantageously used in the procedure of the invention.
Place more than half the total load weight on the bottom drawers when possible.
As mentioned earlier, pay attention to the load weight.
Select load weight manually before starting REDUCE STATIC option.
The position you now have corresponds to a load weight of 0mN.
The maximum authorized load weight is respectively 26 and 32 tons.
After calibration, the device is accurate at the given load weight.
Accordingly, it is impossible to perform accurate load weight determination based on the torque current.
Read-out devices of this type are capable of calibrating to only a single load weight.
The hydraulic circuit has a maximum load weight up to 82 liters / mm.
The limitation in Africa was the high temperatures, which limited the cargo load weight.
In Figure 2 the new determination of the load weight is defined by the block 53.
Fig . 10 is a chart showing the processing flow of the above-described load weight determination.
Shift to D or 1, depending on the load weight and grade steepness.
This secondary indicating step 54 provides a feedback to data processor 30 correcting the load weight determination.
Load weighing device 32 provides the sensed load weight to regenerative drive 34.
When descending a steep grade, shift to lower gears, depending on load weight and grade steepness.
Shift to DRIVE ( D ) or M1, depending on the load weight and grade steepness.
Load sensitivity can be compensated for, if a load weight signal is available.
Enough cotton sheeting ballast to make the dry load weight 1kg was obtained.
O No overloading, no surpassing the load weight limits.
