Examples of 'lock bolt' in a sentence
Meaning of "lock bolt"
Lock bolt: A type of fastener used to securely join two components together. It consists of a bolt and a collar that expands on the blind side to create a strong, vibration-resistant connection
How to use "lock bolt" in a sentence
Basic
Advanced
lock bolt
Install wheel on chair by replacing center lock bolt.
Screw the lock bolt with snow discharge chute.
Knew enough to copy the lock bolt mechanism.
A safety lock bolt is a good way to add protection to your home.
Remove the first lock bolt.
Preferably a lock bolt or a slant natural ground anchor is used as said anchor.
Make any adjustment needed by loosening the table bevel lock bolt with.
Locate the table bevel lock bolt underneath the table.
The rim lock bolt runs through a deflector that is preferably manufactured from rubber.
Release lock bolt no.
Extracting temporary cage 's final lock bolt.
For steering the lock bolt must be removed from the upper clamp ring.
There are two different ways that the lever lock bolt can be thrown.
Check the blower lock bolt and replace if broken off with the wrench handle.
Re-tighten both the adjustment nut and mount lock bolt.
See also
A new blower lock bolt and nut are available from authorized Honda dealer.
As the anchor 9 there may be used a lock bolt or the like.
Wherever a lock bolt is closed, the iron filings will stick.
In addition, a portion of the lever engages the keeper to provide a lock bolt action.
Secure the blower lock bolt with 8 mm nut.
The lock bolt may be of any suitable type, for example sliding, pivoting or articulated.
Connecting system connecting the means of engagement with the lock bolt to said indicator ; and.
The lock bolt forms a push-button able to be operated manually from outside the support ;.
Urging means for normally urging said rotary lock bolt to said normally protruding locking position ;.
The lock bolt 31 is then slackened to a position as shown in figure 7.
The locking mechanism comprises a return spring which urges the lock bolt into its locking position ;.
Allow the lock bolt 5 to latch again.
Release the first lock bolt!
Loosen bevel lock bolt with the 24mm flat wrench included.
Release the second lock bolt!
The lock bolt 395 is preferably constructed from stainless steel to prevent corrosion.
The locking pins 32 may be connected by a lock bolt or a nut.
Thus, lock bolt 10 ' is retracted following the action of the magnetic field on said inductance.
Figure 8 shows an example of the lock bolt 31 according to the invention.
The rotation portion 8 has a cylindrical hole 3 for a lock bolt.
The arrow P shows the turning direction of the lock bolt 31 illustrated in figures 6 and 7.
Pull out the lock bolt 5 and turn it 180 in anticlockwise direction.
The other end of actuating member 26 is operatively connected to a lock bolt ( not shown ).
Replace the auger lock bolt see page 90.
Lock bolt 10 ' is released, engaging again with the firearm mechanical parts.
Replace the blower lock bolt see page 90.
They allow a lock bolt 64 to be deployed at the top end of the slideways 44.
The tabs 25 engage in cooperating slots on the upper surface of the lock bolt 17.
Tighten the bevel lock bolt ( 3 ) with the wrench.
Said lock bolt 10 ' disengage from the firearm mechanical parts, permitting its use.
Thus, in this instance, the lock bolt 59 is made of polyamide.
ULIX-4, Manual retraction and automatic extension of the lock bolt ' slam bolt '.
Pull out the lock bolt 5 and turn it 180 in clockwise direction.
