Examples of 'lock handle' in a sentence
Meaning of "lock handle"
Refers to the mechanism or device used to lock or secure a door, drawer, or other object by turning or pressing the handle
How to use "lock handle" in a sentence
Basic
Advanced
lock handle
Tighten the miter lock handle securely.
To check the locking action of the bevel lock handle.
Tighten the mitre lock handle securely.
Raise or lower the table by loosening the table support lock handle.
Press tab to lock handle into place.
Remove flat head screw from lock handle.
Lock miter lock handle by pressing downward.
Do not lock the miter lock handle.
Tighten the plunge lock handle by turning it clockwise.
Tighten blade tilting lock handle.
Tighten the miter lock handle by rotating it clockwise.
Then tighten the saw blade tilt lock handle.
Turn knobs to lock handle in place.
Hereby a very simple and operationally reliable configuration of the lock handle is accomplished.
Engage the bevel lock handle to lock bevel angle.
See also
Handle adjustment buttons must pop out to lock handle in place.
Turn the tension lock handle located on the front.
Reposition the vise at the desired angle and tighten the miter lock handle.
Tighten lever to lock handle in place.
The miter lock handle securely locks the saw at desired miter angles.
Unlock the plunge lock handle.
Tighten the mitre lock handle to lock the rotary table in place.
Then tighten the lock handle.
Blade tilt lock handle not loosened when making tilt adjustment.
Do not tighten the mitre lock handle at this stage.
The bevel lock handle locks the head assembly at a desired bevel angle.
Tighten the saw blade tilt lock handle after adjustment.
Lock handle position, middle of the coffin box.
Push down the bevel lock handle to lock bevel position.
To secure table setting, lower the lock handle.
Push down on the miter lock handle to lock the miter angle.
Tighten the belt tension by turning the tension lock handle 6.
Always lock the bevel lock handle before any cutting operation.
For vertical cuts, the rail must be mounted with the saw carriage lock handle upwards.
Tighten the miter lock handle so that the table will not.
To adjust, loosen the bevel lock handle.
Completely tighten the bevel lock handle so that the saw head is locked.
Make sure that the table is at 0 and lock the mitre lock handle 1.
Loosen the screws and the lock handle that hold the cover in place.
If the saw blade is not at 90, loosen the saw blade tilt lock handle.
Always lock the saw blade tilt lock handle during operations.
Forgot to lock handle down, which pierces top foil of single-serve packs.
Loosen the mount latch slightly rotating the lock handle counterclockwise.
Unlock the miter lock handle to move the miter arm to the zero position.
Be sure to re-tighten the table support lock handle before drilling.
Always tighten the miter lock handle and bevel lock knob securely before making a cut.
The slider 38 has a second locking mechanism built therein and including a lock handle 52.
Loosen the saw blade tilt lock handle and move the.
Unscrew the lock handle C and pull out the fl at panels.
To avoid serious personal injury, ALWAYS tighten the miter lock handle securely BEFORE making a cut.
