Examples of 'lock into position' in a sentence
Meaning of "lock into position"
lock into position a - means to secure or fix something in a particular place or location
How to use "lock into position" in a sentence
Basic
Advanced
lock into position
The lever will lock into position.
Lock into position by knocking gentle in the direction of the arrow.
Turn the jar to lock into position.
It will lock into position with the tabs on the sides of the platform.
Pull bit retainer up to lock into position as shown in.
Slide waist strap buckles into the harness buckle until they lock into position.
Top fold plate must lock into position correctly.
Insert the whisk into the gear attachment and lock into position.
Everyone lock into position.
Push down on depth lock lever to lock into position.
Legs do not lock into position and can kick out during landing.
The lid latch will lock into position.
The equipment lock into position to prevent the equipment from dropping back down.
Repeat until the wheels fully lock into position.
The card will lock into position and not pop back up when properly inserted.
See also
Push the filler cap down to lock into position.
To help the lever lock into position twist the inserted bit slightly while turning lever.
Attach the blender foot and lock into position.
Handle will lock into position when release lever is released Figure 2.
Rotate adjustment lever toward the base to lock into position.
Aim the luminaire and lock into position with the lever.
Place the blender foot on the base unit and lock into position.
There are two side supports that lock into position when the cooktop is lifted up.
Releasing the lever will cause the leg rest to lock into position.
Attach the door glass and lock into position by pressing the glass near the hinges.
Fit a new thread lifter unit and lock into position.
The hooks 112 are adapted to lock into position on wire mesh forming the fence panel 28.
Place the blade assembly on top and lock into position.
Move the Omega lock into position.
Continue pressing downward until the clips at each end of the socket lock into position.
Insert the hood in the cabinet and lock into position using the side spring.
Server slightly and rotate the four pedestal feet outward until they lock into position.
Apring loaded latch on one side, will lock into position to help support the hood.
The reservoir 6 is attachable to the support member 2 so as to lock into position.
Pull bit retainer up to lock into position as shown in Figure 3B.
Place the base unit on the attachment and lock into position.
Turn it clockwise to lock into position Fig . A.
Set the miter position to 0 degrees and allow the miter detent to lock into position.
The fixing pin ( 2 ) must audibly lock into position in the shaft tube holes.
Place the digestion vessel into the turntable and lock into position.
Raise shelf and push down to lock into position as show B.
Attach the blender foot / gear attachment and lock into position.
Turn the cover lock into position “ ”.
When properly aligned, move handle firmly to the right to lock into position.
Turn the ring in the opposite direction to lock into position CLOSED position.
Set both the desired bevel angle and / or the mitre angle and lock into position.
Place the lid back on, lock into position.
Place the digestion vessel into the 12 places turntable and lock into position.
The dispenser will not locate and lock into position.
Pull the handle back until the ends of the lower handle ( 1 ) lock into position.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
